Language：English   Publishing type：Research paper (scientific journal)  

Ammonia (NH3) is a viable candidate for the storage and distribution of hydrogen (H2) due to its exceptional volumetric and gravimetric hydrogen energy density. Therefore, it is desirable to develop NH3 storage materials that exhibit robust stability across numerous adsorption-desorption cycles. While porous materials with polymeric frameworks are often used for NH3 capture, achieving reversible NH3 uptake remains a formidable challenge, primarily due to the high reactivity of NH3. Here, we advocate the use of CO2H-functionalized cyclic oligophenylene 1a with high chemical stability as a novel single-molecule-based adsorbent for NH3. Simple reprecipitation of 1a selectively yielded microporous crystalline solid 1a (N). Crystalline 1a (N) adsorbs up to 8.27 mmol/g of NH3 at 100 kPa and 293 K. Adsorbed NH3 in the pore of 1a (N) has a packing density of 0.533 g/cm3 at 293 K, which is close to the density of liquid NH3 (0.681 g/cm3 at 240 K). Crystalline 1a (N) also exhibits reversible NH3 adsorption over at least nine cycles, sustaining its storage capacity (1st cycle: 8.27 mmol/g; 9th cycle: 8.25 mmol/g at 100 kPa and 293 K) and crystallinity. During each desorption cycle, NH3 was removed from 1a (N) under reduced pressure (∼65 Pa), leaving <3% of the total uptake, and 1a (N) was fully purged under dynamic vacuum conditions (∼5 × 10-4 Pa at 293 K for 1 h) before the subsequent adsorption cycles. Thus, microporous crystalline 1a (N) can reliably adsorb and desorb NH3 repeatedly, which avoids the need for heat-based activation between cycles.

DOI： 10.1021/jacs.4c03798

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Short-stranded double-helical monometallofoldamers capable of M/P-switching were constructed by the complexation of two strands, each with two L-shaped units linked by a 2,2'-bipyridine, with a Zn(II) cation. The helix terminals of the "double-helical form" folded by π-π interactions can unfold in solution to equilibrate with the "open forms" that are favored at higher temperatures. Interestingly, the helical chirality of the monometallofoldamers with chiral side chains induced a single-handed helix sense and controlled M/P-switching depending on achiral solvent stimuli. For instance, the (M)-helicity was favored in nonpolarized solvents (toluene, hexane, Et2O), whereas the (P)-helicity was favored in Lewis basic solvents (acetone, DMSO). Circular dichroism (CD) and rotating-frame overhauser enhancement spectroscopy (ROESY) measurements revealed that the conformational change of the chiral side chains due to interaction of Lewis basic solvents with the double helices induced helicity bias. These novel double-helical monometallofoldamers possessed a stable helical structure and exhibited switchable chiroptical properties (gabs ∼ 10-3-10-2). In addition, the chiral strand exhibited chiral transfer and amplification abilities through the formation of chiral heteroleptic double-helical monometallofoldamers when mixed with an achiral strand.

DOI： 10.1021/jacs.4c06560

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Positive homotropic artificial allosteric systems are important for the regulation of cooperativity, selectivity and nonlinear amplification. Stereodynamic homotropic allosteric receptors can transmit and amplify induced chirality by the first ligand binding to axial chirality between two chromophores. We herein report stereodynamic allosteric urea receptors consisting of a rotational shaft as the axial chirality unit, terphenyl units as structural transmission sites and four urea units as binding sites. NMR titration experiments revealed that the receptor can bind two carboxylate guests in a positive homotropic allosteric manner attributed to the inactivation by intramolecular hydrogen-bonding between urea units within the receptor. In addition, the VT-CD spectra observed upon binding of the urea receptor with l- or D-amino acid salts in MeCN showed interesting temperature-dependent Cotton effects, based on the differences of the receptor shaft unit and the guest structure. The successful discrimination of hydrocarbon-based side chains of amino acid salts indicated that the input of chiral and steric information for the guest was amplified as outputs of the Cotton effect and the temperature-dependence of VT-CD spectra through cooperativity of positive allosteric binding.

DOI： 10.1002/chem.202400154

PubMed

researchmap

Publishing type：Research paper (scientific journal)  

DOI： 10.1002/chem.202301804

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A novel structural interconversion unit based on intramolecular boroxine formation has been developed. A macrocyclic triboronic acid consisting of three phenylboronic acid units linked by covalent linkers preferentially underwent intramolecular rather than intermolecular boroxine formation, resulting in a quantitative formation of tricyclic boroxine. This structural transformation was accompanied by changes in the polarity, flexibility, and size of the molecule. Dynamic interconversion between the macrocyclic triboronic acid and the tricyclic boroxine was achieved by simple heating/cooling, whereas no boroxine formation occurred upon heating when three boronic acid units were not connected by linkers. Thermodynamic analysis revealed that the entropic advantage of the intramolecular boroxine formation process resulted in these unique features. The entropically stabilized tricyclic boroxine also shows high stability with respect to hydrolysis.

DOI： 10.1002/chem.202300995

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

The synthesis of endo-functionalized cyclic oligophenylenes in which adjacent benzene rings are perpendicular to one another is described. Annulation precursors, OH- or NH2-functionalized quinquephenyl diboronic acids, and septiphenyl dibromo compounds were systematically prepared by using a diprotected biphenyl-3,4'-diyl diboronic acid as a key compound. Four endo-functionalized cyclic oligophenylenes were synthesized by annulation of the precursors in dilute conditions through Suzuki-Miyaura cross-coupling. X-ray analysis of the macrocycle revealed the unique 1D channel packing structure formed by connecting the nanometer-sized cavity of the macrocycle. Furthermore, NH2-functionalized macrocycles could bind a chiral phosphoric acid in the cavity in CDCl3 solution.

DOI： 10.1021/acsomega.2c05926

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A novel synthetic strategy for large macrocyclic molecules using boroxine formation was developed. For this, the threefold intramolecular olefin metathesis of 3,5-bis(alkenyloxy)phenylboroxines with various lengths of alkenyl chains, formed by the dehydration of the corresponding boronic acid substrates, together with treatment with pinacol, was used to produce 39-, 45-, and 51-membered macrocyclic compounds with three boronate units. The boroxine moiety functions as a covalent template but can also be used to postmodify the macrocycle. Boroxine-templated macrocyclization implemented in this way does not require the addition of template molecules and simplifies the synthetic procedure.

DOI： 10.1039/d2cc04691a

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Boronic esters are known to be formed simply by mixing boronic acids and alcohols under neutral conditions, and the equilibrium is in favor of the boronic esters when 1,2- or 1,3-diols are employed as alcohols. By utilizing the dynamic nature of the boronic ester formation, our group successfully constructed unique boron-containing 3D structures, such as ring-shaped macrocycles, cages, and tubes, based on the boronic ester formation of various aromatic di-, tri-, or hexaboronic acids with an originally designed tetrol 1 containing two sets of fixed 1,2-diol units oriented on the same face of an indacene framework. Various functions of the obtained boronates were further pursued to disclose the characteristic features of this system. This personal account describes our self-assembled boronate system using tetrol 1 including synthesis, host-guest chemistry, kinetic connection, characteristic dynamic behaviors, and supramolecular catalysis.

DOI： 10.1002/tcr.202100214

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Ring-over-ring slippage and ring-through-ring penetration are important processes in the construction of ring-in-ring multiple interlocked architectures. We have successfully observed "ring-over-ring deslipping" on the rotaxane axle by exploiting the dynamic covalent nature of imine bonds in imine-bridged heterorotaxanes R1 and R2 with two macrocycles of different ring sizes on the axle. When the imine bridges of R1 were cleaved, a hydrolyzed hetero[4]rotaxane [4]R1' was formed as an intermediate under dynamic equilibrium, and the larger 38-membered macrocycle M was deslipped over the 24-membered ring (24C8 or DB24C8) to dissociate into a [3]rotaxane [3]R3 and a macrocycle M. The time dependent NMR measurement and the determined thermodynamic parameters revealed that the rate-limiting step of the deslipping process was attributed to steric hindrance between two rings and reduced mobility of M due to proximity to the crown ether, which was bound to the anilinium on the axle molecule.

DOI： 10.3389/fchem.2022.885939

PubMed

researchmap

Publishing type：Research paper (scientific journal)   Publisher：Springer Science and Business Media LLC  

DOI： 10.1007/s10847-021-01074-6

researchmap

Other Link： https://link.springer.com/article/10.1007/s10847-021-01074-6/fulltext.html

Language：English   Publishing type：Research paper (scientific journal)  

A boronic ester cage, which exhibits stimuli-responsive guest-release behavior, was constructed by self-assembly of tetrol with the indacene backbone and a fluorine-substituted benzenetriboronic acid derivative. The presence of fluorine substituents made it possible to control the guest release rate using simple amines by forming tetrahedral borates.

DOI： 10.1039/d0cc01441a

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Helical structures were constructed by using π-spacer-bridged dimers of dibenzopyrrolo[1,2-a][1,8]naphthyridine, which has a highly fluorescent L-shaped π-extended skeleton. Three dimers with biphenylene (dimer 1), phenanthrene (dimer 2), and m-phenylene (dimer 3) spacers, as well as a fixed-helical dimer 4 where two quinolone rings were covalently cross-linked, were designed and prepared. 1 H NMR and ROESY spectra revealed that dimers 1 and 2 adopted helical forms in solution, whereas dimer 3 did not. The helical conformation of 1 was strengthened by addition of either polar or nonpolar solvents to the chloroform solution, which suggested that π-π stacking was the main contributor to the stabilization of the helical structure. All of the dimers, including fixed-helical dimer 4, emitted fluorescence with high quantum yields (ϕ=0.79-0.86).

DOI： 10.1002/chem.201903538

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A K+-promoted Diels-Alder reaction of 1,4,9,10-anthradiquinone with various dienes is achieved in the presence of a self-assembled macrocyclic boronic ester [2+2]crown containing two crown ether moieties. The reaction rate is remarkably accelerated (up to 206-fold) compared to that in the absence of the promoter. Furthermore, the reaction proceeds regioselectively to yield an internal adduct. The self-assembly protocol was also demonstrated.

DOI： 10.1039/c9sc01597c

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Discrete, large, covalent organic cages have recently been constructed by utilizing various types of dynamic covalent bond formation. The reversibility of bond formation can provide an opportunity to exhibit unique dynamic behavior; however, the transformation of such rigid cages to other structures remains challenging. To clarify the current status of this emerging research field, this Concept article gives an overview of recent progress of the dynamic behavior of covalent organic cages by classifying them into four types of transformation, namely, dimerization into the interlocked cages, transformation into different cage structures, exchange of components, and disassembly. The driving forces of such dynamic behavior and problems to be solved are also highlighted.

DOI： 10.1002/chem.201802253

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Dynamic interconversion between large covalent organic cages was achieved simply by heating or acid/base treatment. A mixture of the boroxine cages 12-mer and 15-mer was cleanly converted into a pyridine adduct of the 9-mer boroxine cage upon treatment with pyridine, and the geometry of N-coordinated boron atoms changed from trigonal to tetrahedral. The reverse reaction was achieved by heating or acid treatment. In this process, the larger boroxine cages 12-mer and 15-mer were found to be entropically favored owing to the release of free pyridine molecules from 9-mer⋅6 Py.

DOI： 10.1002/anie.201713221

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A conceptually new method for the catalytic electrophilic activation of aromatic carbonyl substrates, by utilizing donor-acceptor interactions between an electron-deficient macrocyclic boronic ester host ([2+2]BTH-F ) and an aromatic carbonyl guest substrate, was realized. In the presence of a catalytic amount of [2+2]BTH-F , dramatic acceleration of the nucleophilic addition of a ketene silyl acetal towards either electron-rich aromatic aldehydes or ketones was achieved. Several control experiments confirmed that inclusion of the aromatic substrates within [2+2]BTH-F , through efficient donor-acceptor interactions, is essential for the acceleration of the reaction.

DOI： 10.1002/anie.201711726

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

The L-shaped, π-extended pentacycle dibenzopyrrolo[1,2-a][1,8]naphthyridine and its derivatives were synthesized using two methods: fully intramolecular [2 + 2 + 2] cycloaddition and oxidative aromatization using substituted carbodiimide and modification of an electron-rich indole ring of an L-shaped skeleton via electrophilic reaction and cross-coupling. These L-shaped compounds emitted fluorescence in high quantum yield. The position of substituents affected the fluorescence color through two different mechanisms, π-conjugation and skeletal distortion, which caused the substituted L-shaped compounds to emit fluorescence in a variety of colors and to exhibit solvato-fluorochromism.

DOI： 10.1021/acs.joc.7b02674

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Control of the reversibility during boronic ester formation from boronic acids and diols was found to be possible by choosing an appropriate solvent. As an example, ferrocene dimers and trimers were constructed by using tetrol 1 with an indacene framework, 1,1'-ferrocenediboronic acid 2, and ferrocenemonoboronic acid 4. When equimolar amounts of 1 and 2 were mixed in methanol under equilibrating conditions, two kinds of stacked ferrocene dimers homo- and hetero-3 were selectively obtained depending on the reaction time and both structures were determined by X-ray crystallographic analysis. On the other hand, the ferrocene trimer 7 was successfully constructed by stepwise assembly in the presence of anhydrous magnesium sulfate in acetone where the equilibration of boronic esters was suppressed, while no formation of ferrocene trimer 7 was detected when all components 1, 2 and 4 (2 : 1 : 2 ratio) for trimer 7 were mixed at a time in methanol under equilibrating conditions.

DOI： 10.1039/c6dt04845e

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Selective inclusion of each of bicyclic and tricyclic aromatic guest molecules was realized utilizing the self-assembly of a crystalline benzothiadiazole-type macrocyclic boronic ester. The complete switching of the guest selectivity was achieved simply by changing the cosolvent used in the formation of the crystalline host-guest complexes. Both the association free energy of host-guest complexes and the stability of packing structure were found to play important roles for the determination of the guest selectivity in this system, and the critical role of solvent molecules in the crystalline state for the switching phenomena was clarified.

DOI： 10.1039/c5sc04766h

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A polyoxometalate-silver ethynide composite cluster, [Ag42(CO3){C≡CC(CH3)3}27(α-A-SiW9Nb3O40)2](-) (1), demonstrates that we can select the binding site of a polyoxometalate to the silver alkynide cluster by tuning the surface charge of the precursor polyoxometalate. Multidimensional and multinuclear NMR spectra revealed that 1 maintains its precise atomic connectivity in the solution.

DOI： 10.1039/c5dt02972d

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

By use of the reversible trimerization of boronic acids, the series of boroxine cages 3-mer, 6-mer, and 12-mer were constructed from rationally designed diboronic acids whose bond angles between two C-B bonds are 60°, 84°, and 117°, respectively. Boroxine cages 6-mer and 12-mer have 1.5 and 2.5 nm sized cavities, respectively.

DOI： 10.1021/jacs.5b02716

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

The inclusion of two different guest molecules in a macrocyclic boronic ester in organic solvent utilizing only π-stacking interactions has been successfully realized. For this purpose, a new tetrol which has an appropriate distance between two 1,2-diol units for the inclusion of two aromatic molecules is designed and synthesized. Simple mixing of the new tetrol with 2,7-pyrenediboronic acid in the presence of pyrene-4,5-quinone efficiently affords the desired macrocyclic boronic ester, which is found by (1)H NMR spectroscopy, ESI-MS, and isothermal titration calorimetry studies to include one molecule each of a dinitronaphthalimide derivative and pyrene. Furthermore, inclusion of two planar molecules within the macrocyclic boronic ester is revealed by X-ray analysis.

DOI： 10.1002/chem.201405163

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

A procedure-dependent selective construction of two isomers of trimeric boronic esters was realized. A capsule-like trimeric boronic ester was constructed by the direct connection of two kinds of self-assembled boronic esters via [3+2] cycloaddition, while the tricyclic trimeric boronic ester was obtained by the self-assembly of pre-connected components.

DOI： 10.1039/c4cc05836d

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Efficient inclusion of electron-deficient aromatic guest molecules in an organic solvent utilizing π-stacking interactions was achieved by using two kinds of macrocyclic boronic esters, 1,4-naph-[2+2] and 1,5-naph-[2+2], which were easily prepared by self-assembly of 1,4-naphthalenediboronic acid (3) or 1,5-naphthalenediboronic acid (4) and racemic tetrol 1 with an indacene framework in a protic solvent. The X-ray crystallographic analyses revealed that the tilt angles of the two naphthalene rings are different: that of 1,4-naph-[2+2] is about 15° and that of 1,5-naph-[2+2] is about 0°. Owing to the parallel alignment of two aromatic rings, 1,5-naph-[2+2] has a much higher binding ability than 1,4-naph-[2+2]. This knowledge could be useful for the design of the new host molecules in organic solvents.

DOI： 10.1002/asia.201301577

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Borate gel formation from guest-encapsulated macrocyclic boronic esters was realized by the addition of a diamine to the suspension of the boronic esters in various organic solvents, which triggered the release of the guest compounds. The guest molecules could be recovered from the borate gel by addition of an acid to remove the diamine, which facilitated the reconstruction of the initial guest-encapsulated macrocyclic boronic esters.

DOI： 10.1002/anie.201303870

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Block copolymer lithography holds promise as a next-generation technique to achieve the sub-20 nm feature sizes demanded by semiconductor roadmaps. While molecular weight and block immiscibility have traditionally been used to control feature size, this study demonstrates that macromolecular architecture is also a powerful tool for tuning domain spacing. To demonstrate this concept, a new synthetic strategy for cyclic block polymers based on highly efficient "click" coupling of difunctional linear chains is developed, and the thin film self-assembly of cyclic polystyrene-block-polyethylene oxide (cPS-b-PEO) is compared with the corresponding linear analogues. The reduced hydrodynamic radii of the cyclic systems result in ~30% decrease in domain spacing over the corresponding linear polymers.

DOI： 10.1021/nn304217y

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Controlled construction of four out of five diastereomers of macrocyclic boronic ester was achieved in high yield by utilizing the self-assembly of two chiral components with the proper choice of reaction conditions. Three diastereomers could be constructed as enantiopure forms by properly changing the chirality combination between the two building blocks. Furthermore, the methodology could be applicable to the three-component self-assembly of enantiopure macrocyclic boronic esters having two different diboronic acid moieties.

DOI： 10.1021/ja306249f

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Guest-induced self-assembly of a macrocyclic boronic ester containing photochromic diarylethene units is realized and this macrocycle showed high quantum yield of photoisomerization due to favourable conformational constraint.

DOI： 10.1039/c2cc31989f

PubMed

researchmap

Publishing type：Research paper (scientific journal)  

DOI： 10.5059/yukigoseikyokaishi.70.653

Scopus

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Three-dimensional m × n arrays of metal ion clusters can be assembled as aromatic stacks of planar polynuclear metal complexes within columnar coordination cages. The polynuclear complexes and cage height program the final array structures of the metal ion clusters. Cyclic trinuclear Au(I) complexes (m = 3) assembled into trigonal prismatic arrays (n = 1-3) within the cages and the array structures were clearly shown by X-ray crystallographic analysis. A silver-sandwiched hetero-Au(3)-Ag-Au(3) cluster was also prepared by treating a hexanuclear Au(3)-Au(3) cluster with Ag(I) ion.

DOI： 10.1021/ja108367j

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Three anthracene rings connected by m-phenylene spacers with hydroxy groups generate isolable trans- and cis-atropisomers whose interconversion is solvent sensitive and can be activated at room temperature by an external stimulus (base).

DOI： 10.1039/b912365b

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Red-emissive molecules have important applications as chemosensors, biological tags, and new light source materials but are severely limited by solubility and the tendency to form nonemissive aggregrates. Here we present an unusual example where a coordination cage sequesters and maintains the red-emissive properties of tetraazaporphine (TAP) in aqueous solution. Additionally, encapsulation within the highly cationic host lowers the pK(a) of the TAP interior protons, leading to the formation of an acid/base ON/OFF fluorescent switch.

DOI： 10.1021/ja904875y

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Encapsulation by synthetic hosts can transform the spin states of square planar Ni(II)(acen) and Co(II)(tap) complexes. Upon encapsulation, the red Ni(II) diamagnetic state was converted into a green paramagnetic state, whereas the Co(II) low spin (S = 1/2) state was changed into a coupled (S = 1/2 and S = 3/2) state. The host cages are noninnocent and host-guest interactions within the confined cavity influence the resultant properties of the enclathrated metal complexes.

DOI： 10.1021/ja8089894

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Discrete homo Cu-Cu-Cu and hetero Cu-Pd-Cu or Cu-Co-Cu metal arrays are prepared within an organic-pillared coordination box by inserting M(ii)-azaporphine/porphine cartridges (M = Cu(ii), Pd(ii) or Co(ii)), where the metal arrays show unique spin interactions in ESR: in particular, Deltam(s) = 3 for the Cu-Cu-Cu array.

DOI： 10.1039/b801701h

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

PubMed

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

Two molecules of planar MII(acac)2 complexes (M = Pt, Pd, and, Cu; acac = acetylacetonato) are efficiently stacked within an organic-pillared coordination cage, exhibiting characteristic spectroscopies (for M = Pt and Pd) and electron spin-spin coupling (for M = Cu) attributable to metal-metal interaction.

PubMed

researchmap

Publishing type：Research paper (scientific journal)   Publisher：Oxford University Press (OUP)  

Abstract

Metal complexes of a highly deformed 1,4,8,11,15,18,22,25-octaphenylphthalocyanine have been synthesized, and found to show various colors ranging from bright green, ocher, and red depending on the central metal employed.

DOI： 10.1246/cl.2003.736

researchmap

Language：English   Publishing type：Research paper (scientific journal)  

researchmap

researchmap