担当区分：筆頭著者,　責任著者   掲載種別：研究論文（学術雑誌）   出版者・発行元：Wiley  

Activity coefficients of FeO and FeO1.5 in CaO-SiO2-FeO-Fe2O3 melts have been investigated from the perspective of the coordination structures of iron ions. The melts were placed in Pt containers at 1573 K and equilibrated at partial pressures of oxygen in the range between 10-9 and 10-4 atm, and the activities were derived from Fe concentrations in the Pt containers using the activity coefficient of Fe in Pt-Fe alloys reported as a function of molar fraction of Fe. The percentages of Fe2+ and Fe3+ in octahedral symmetry (Fe3+(oct)) and Fe3+ in tetrahedral symmetry (Fe3+(tetr)) were measured by Mössbauer spectroscopy. It has been found that both values of FeO and FeO1.5 monotonically increase with increasing PO2 and that the FeO values are higher than the FeO1.5 values suggesting that FeO is more readily released from the silicate network to precipitate FeOx-bearing compound from the slag than FeO1.5. It has also been found that the FeO1.5 value increases with increasing the ratio of Fe3+(oct) pct./Fe3+(tetr) pct., which indicates that the values of FeO1.5(oct) are higher than those of FeO1.5(tetr). Accordingly, the hierarchy of the activity coefficients, i.e., FeO > FeO1.5(oct) > FeO1.5(tetr) holds in the present system. The magnitude of effective ionic radii is in the hierarchy of Fe2+ > Fe3+(oct) > Fe3+(tetr), and thereby the bond strength between iron ion and oxide ion is in the hierarchy of Fe3+(tetr) > Fe3+(oct) > Fe2+. This suggests that Fe2+ are more loosely and Fe3+(tetr) are more rigidly bound to the silicate skeleton.

DOI： 10.1002/srin.202400068

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

Silicon-containing steel forms an oxide layer within the scale during hot rolling.
This layer comprising oxides such as Fe2SiO4 and FeO adversely affect the surface
quality of steel owing to strong adhesion between Fe2SiO4 and the steel substrate.
A method to melt this silicon-containing oxide layer through the oxidation reac
tion of iron plates by applying SiO2 powder to the surface is proposed. The aim of
this study is to understand the reaction mechanism and identify the optimal condi
tions for this process. Application of SiO2 coating to the surface of an iron plate
at 6.67 × 10–4 g·mm−2 and maintaining the plate at 1423 K, just below the eutectic
temperature of Fe2SiO4–FeO system (1450 K), cause the surface oxide scale to melt
when exposed to oxidation in an atmospheric environment. Notably, reducing the
electric furnace temperature hinders the melting process, whereas excessive applica
tion of SiO2 hampers the formation of sufficient liquid phase. On the surface of the
iron plate, primarily FeO and Fe2SiO4 are formed. Heat generation is mainly due to
the formation of FeO, which leads to the rapid generation of Fe2SiO4. Eutectic reac
tions within SiO2–Fe2SiO4 or FeO–Fe2SiO4 systems drive the formation of the liq
uid phase. Once the liquid phase was established, rapid diffusion of iron ions within
it resulted in rapid iron oxidation and additional heat generation. Ultimately, a liquid
phase in equilibrium with FeO is formed across the entire surface of the iron plate.

DOI： 10.1007/s10765-024-03338-y

researchmap

担当区分：責任著者   掲載種別：研究論文（学術雑誌）   出版者・発行元：Iron and Steel Institute of Japan  

DOI： 10.2355/isijinternational.ISIJINT-2023-292

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:title>Abstract</jats:title><jats:p>The thermal conductivity of a single-phase gehlenite (2CaO Al<jats:sub>2</jats:sub>O<jats:sub>3</jats:sub> SiO<jats:sub>2</jats:sub>) sample was determined using thermal microscopy. The composition of the primary crystal region of the gehlenite sample was CaO: SiO<jats:sub>2</jats:sub>:Al<jats:sub>2</jats:sub>O<jats:sub>3</jats:sub> = 38:28:34 (mass%), which was maintained after melting and cooling. After polishing the samples, the size of the gehlenite crystal was sufficiently large to be measured using a thermal microscope. The value of <jats:inline-formula><jats:alternatives><jats:tex-math>$$\sqrt{\lambda C\rho }$$</jats:tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML">
<mml:msqrt>
<mml:mrow>
<mml:mi>λ</mml:mi>
<mml:mi>C</mml:mi>
<mml:mi>ρ</mml:mi>
</mml:mrow>
</mml:msqrt>
</mml:math></jats:alternatives></jats:inline-formula>, where <jats:italic>λ</jats:italic> is thermal conductivity <jats:italic>C</jats:italic> is specific heat andρis density, of the samples was measured every 10 μm to obtain its distribution. When comparing the results with the optical microscopy image of the sample, the gehlenite region showed a larger value of <jats:inline-formula><jats:alternatives><jats:tex-math>$$\sqrt{\lambda C\rho }$$</jats:tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML">
<mml:msqrt>
<mml:mrow>
<mml:mi>λ</mml:mi>
<mml:mi>C</mml:mi>
<mml:mi>ρ</mml:mi>
</mml:mrow>
</mml:msqrt>
</mml:math></jats:alternatives></jats:inline-formula> than the glassy region. Specifically, the value of <jats:inline-formula><jats:alternatives><jats:tex-math>$$\sqrt{\lambda C\rho }$$</jats:tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML">
<mml:msqrt>
<mml:mrow>
<mml:mi>λ</mml:mi>
<mml:mi>C</mml:mi>
<mml:mi>ρ</mml:mi>
</mml:mrow>
</mml:msqrt>
</mml:math></jats:alternatives></jats:inline-formula> of the gehlenite region was determined to be 2.2 ± 0.1 kJs<jats:sup>−0.5</jats:sup>·m<jats:sup>−2</jats:sup>·K<jats:sup>−1</jats:sup>, which resulted in a thermal conductivity of 2.1 ± 0.2 Wm<jats:sup>−1</jats:sup>·K<jats:sup>−1</jats:sup>. Moreover, the oxide gehlenite phase showed lower thermal conductivity than the other constituent phases, i.e., CaO, Al<jats:sub>2</jats:sub>O<jats:sub>3</jats:sub>, and SiO<jats:sub>2</jats:sub>.</jats:p>

DOI： 10.1007/s10765-023-03185-3

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.tetsu-2022-107

researchmap

担当区分：筆頭著者,　責任著者   記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2022-107

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2019-635

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.tetsu-2021-002

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.tetsu-2020-072

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2020-140

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2020-163

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2019-266

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2019-097

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）   出版者・発行元：Springer Science and Business Media {LLC}  

DOI： 10.1007/s42243-019-00237-7

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.ISIJINT-2018-518

Web of Science

Scopus

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2017-661

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.ISIJINT-2018-380

Web of Science

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2017-552

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.ISIJINT-2016-661

Web of Science

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2017-305

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.tetsu-2016-079

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.tetsu-2016-082

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>The temperature dependence of the microwave absorption behavior of BaTiO3 particles was investigated over various frequencies and temperatures of 25-1000 ∘C. First, using both the coaxial transmission line method and the cavity perturbation method by a network analyzer, the real and imaginary parts of the relative permittivity of BaTiO3 (εr′ and εr″, respectively) were measured, in order to improve the reliability of the data obtained at 2.45 GHz. The imaginary parts of the relative permittivity as measured by the two methods were explored by their heating behaviors. Furthermore, the temperature dependence of the microwave absorption behavior of BaTiO3 particles was investigated for frequencies of 2.0-13.5 GHz and temperatures of 25-1000 ∘C using the coaxial transmission line method.</jats:p>

DOI： 10.1063/1.4953325

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2016-065

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2015-461

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1016/j.physb.2014.11.003

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.55.1223

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.isijint-2015-229

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.55.1210

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>In materials processing research using microwave heating, there have been several observations of various phenomena occurring known as microwave effects. One significant example of such a phenomenon is increased reaction kinetics. It is believed that there is a possibility that this might be caused by localized heating, were some reactants would attain a higher than apparent temperature. To examine whether such thermal gradients are indeed possible, mixed powders of two microwave non-absorbers, alumina and magnesia, were mixed with graphite, a known absorber, and heated in a microwave furnace. During microwave irradiation, the local temperatures of the respective sample constituents were measured using an in situ x-ray diffraction technique. In the case of the alumina and graphite sample, a temperature difference of around 100 °C could be observed.</jats:p>

DOI： 10.1063/1.4899242

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>Silicon carbide is a key material in microwave (MW) processing and is used widely as a thermal insulator and catalytic agent. In this study, we experimentally investigated the temperature dependence of the MW-absorption properties of SiC particles at frequencies of 2.0–13.5 GHz. We heated SiC particles of different sizes using MW radiation. The heating behaviors of the particles were then compared with their MW-absorption properties. The heating behavior of the particles was dependent on their radii; this result was in keeping with theoretical predictions. Furthermore, the β-SiC particles exhibited anomalous behaviors when subjected to microwave heating at temperatures of 1100 °C and higher. These behaviors were attributable to the transformation of β-SiC into the α-phase. The underlying mechanism for this transformation is discussed on the basis of the results of X-ray diffraction analysis.</jats:p>

DOI： 10.1063/1.4890849

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1016/j.cep.2013.12.001

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/tetsutohagane.100.211

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.54.1067

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.54.1765

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:title>Abstract</jats:title><jats:sec><jats:label /><jats:p>Recently, microwave energy is expected to be a heat source for high temperature process aiming at CO<jats:sub>2</jats:sub> reduction and energy conservation owing to the possibility of volumetric and selective heating. In order to examine the applicability of microwave heating to ironmaking, a basic research may be required with respect to the heating mechanism of raw and product materials of ironmaking as well as the carbothermic reduction mechanism of iron ore. To carry out this research, the authors have developed a single mode microwave furnace combined with X‐ray diffraction analysis. By using this, the authors have elucidated the effects of electric and magnetic fields of microwave on carbothermic reduction of magnetite powders, and have observed the selective heating of materials. It has been found that the Fe<jats:sub>3</jats:sub>O<jats:sub>4</jats:sub>–C mixed powders are more rapidly heated by the magnetic field than by the electric field just after the onset of heating. The rapid heating owing to the magnetic field is associated with the magnetic loss of Fe<jats:sub>3</jats:sub>O<jats:sub>4</jats:sub> powders. With respect to the magnetic field heating, once the temperature increases up to 800–1000°C, the temperature does not increase and the reduction hardly progresses, which may stem from the decrement in the microwave absorption of the sample. The main heat source is C at this stage. On the other hand, temperature monotonically increases up to around 1000°C and reaction gradually progresses for the electric field heating. It is considered that the main energy absorber is C at the beginning, and then is possibly changed to FeO at elevated temperatures.</jats:p></jats:sec>

DOI： 10.1002/srin.201200307

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>We have investigated the microwave heating characteristics of non-magnetic conductive multi-particle systems using spatially separated electric and magnetic fields (Emax and Hmax, respectively) to determine the effects of the multi-particle structure on microwave heating. Pure carbon, carbon black, and artificial graphite multi-particle systems exhibited peak microwave absorption at specific relative densities only under Hmax. These absorptions can be categorized into two types: one originates from coupling between metal spheres, while the other originates from a heterogeneous distribution of particles.</jats:p>

DOI： 10.1063/1.4772648

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.53.1125

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.53.1

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/s11663-012-9713-8

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1016/j.msea.2012.07.049

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>We determine the mechanism of rapid and selective heating of nonmagnetic conductive particles by the electric and magnetic fields of microwaves. We investigated the dependencies of the heating behaviors of carbon powders on the radius and electrical conductivity for various relative densities. In these experiments, strong microwave absorption was observed in magnetic field at certain radii and ratios of the crystallite size to the radius. Mie theory for a single particle could account for the high heating rates generated by the microwave magnetic field in sintering experiments. In the dependence of the heating behavior on the relative density, that H field exhibited the maximum absorption at certain relative densities of the graphite powders. These surface plasmon-like modes were observed in graphite, but were not observed when an E field was applied. Multiparticle systems such as graphite powder were found to have significantly different heating behaviors from a single particle. Microwave heating of metal particles is expected to be affected by the structure and shape of the particles.</jats:p>

DOI： 10.1063/1.4745871

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.52.1740

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.52.2149

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p> In modelling mass and heat transfer steps in metallurgical processes, it is important to have knowledge of the physical properties of slags, the most important among these being the surface and interfacial tensions, thermal diffusivities, optical properties and viscosities. A critical review is presented of work reported in the past two decades relating to the following properties of slag systems: (i) surface/interfacial tensions and related interfacial phenomena; (ii) thermal diffusivities and thermal conductivities; (iii) velocities and coefficients of absorption of ultrasonic waves; (iv) optical properties. A perspective for further work is also provided. </jats:p>

DOI： 10.1179/1743280411y.0000000007

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1080/08327823.2011.11689808

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.51.203

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.51.491

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.51.689

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.51.1766

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1080/08327823.2010.11689788

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.50.1514

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.49.74

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.49.1443

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

Web of Science

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.48.925

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:title>Abstract</jats:title>
<jats:p>In the present work, thermal diffusivity measurements of three industrially significant alloys, viz. 90Ti.6Al.4V, stainless steel with 25Cr and 6Ni as well as plain carbon steel with 0.7 % carbon have been carried out as a function of temperature. The aim of this work is to study the effect of temperature and microstructure on the thermal diffusivities of these alloys. For the 90Ti.6Al.4V alloy, thermal diffusivity increases with temperature below 1225 K. Above this temperature, the values started decreasing probably due to the dissolution of Ti<jats:sub>3</jats:sub>Al intermediate phase in the matrix, which would result in an increase in the disorder of the structure. For 25Cr: 6Ni stainless steel, the thermal diffusivity is nearly constant up to about 700 K. Above this, there is an increase in the thermal diffusivities with temperature during the heating cycle, which was reproducible during thermal cycling. On the other hand, the slope of the curve increases above 950 K.</jats:p>
<jats:p>In the case of the 0.7 % carbon steel, the thermal diffusivity shows a decreasing trend with temperature below the Curie point for the alloy, where the alloy consists of bcc + fcc phases. Above this point, only the fcc phase is prevalent and the thermal diffusivity was found to increase with temperature. Heat transfer is carried out by lattice vibration (phonons) as well as electrons. The contribution of electrons varies depending upon the type of alloy. In this study, the highest electron contribution was found in 0.7 % carbon steel, while the lowest was in stainless steel. The thermal conductivity values of these alloys are in good agreement with the calculated values using the model proposed by Mills.</jats:p>

DOI： 10.3139/146.101497

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/s10765-007-0151-9

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/s10765-007-0163-5

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>High temperature XRD and thermal diffusivity experiments were employed to investigate the degree of graphitisation in blast furnace coke. The experiments were conducted between room temperature and 1473 K. X‐ray diffraction studies were carried out in order to monitor the degree of graphitisation in the coke samples from the same campaign. In these cases, the degree of graphitisation was followed by the changes in the vertical dimension. The degree of graphitisation was found to be dependent on temperature. On the other hand, the graphitisation at each temperature was instantaneous, even at as low a temperature as 973 K and no dependency on time could be noticed. The thermal diffusivities of the coke samples taken from deeper level of the experimental blast furnace were measured using the laser‐flash technique. The results from these measurements showed that thermal diffusivities increased with the degree of graphitisation, which in turn, can be affected by the level in the blast furnace at which the coke sample was taken. The present results indicate that the degree of graphitisation as followed by X‐ray diffraction analysis as well as thermal diffusivities can be used to trace the thermal history of coke. DSC measurements show that the heat capacity of the coke increases with temperature towards the heat capacity of graphite, which could be due to the increasing the graphitisation degree of the coke.</jats:p>

DOI： 10.1002/srin.200606460

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.46.801

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.46.1805

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.44.1527

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.44.691

researchmap

掲載種別：研究論文（学術雑誌）  

DOI： 10.1515/htmp.2003.22.5-6.369

researchmap

掲載種別：研究論文（学術雑誌）  

DOI： 10.1515/htmp.2003.22.5-6.267

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.3139/146.031179

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1068/htjr123

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/bf02709753

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/s11663-002-0084-4

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.42.352

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1179/irs.2001.28.5.390

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1016/s0022-3093(01)00322-2

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>The effect of valence states of iron on the magnetic structure of as-quenched silicate glasses containing iron oxides has been investigated. The glasses, all having the same compositions, are melted in various oxygen pressures to control the ratios of Fe3+ ions to the total number of iron ions and quenched at the same speed, and the magnetic properties are measured. There are only a few reports which focus particularly on the relation between valence states of iron and the magnetic properties of the glasses. Here, the dc magnetizations and ac susceptibilities of the glasses are explained based upon a proposed magnetic structure model in which both microcrystalline clusters and free iron ions in the glass matrix bear magnetism. (In this article free iron ions mean iron ions which are distributed in the glass matrix.) The number density of microcrystalline clusters is highest in a sample of x=0.73 (x: the ratio of Fe3+ ions to the total number of iron ions) and it becomes smaller as the value of x becomes smaller and larger than 0.73. The average magnetic interaction among free iron ions in the glass matrix is stronger in the samples having larger values of x.</jats:p>

DOI： 10.1063/1.369535

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1016/s0304-8853(97)00056-5

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.2355/isijinternational.37.126

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

<jats:p>Annealing of 20CaO⋅20SiO2⋅7Fe2O3⋅6FeO glasses at 973 K in vacuo produced clusters of a nonstoichiometric solid solution between Fe3O4 and γ-Fe2O3. The growth of clusters proceeded by diffusion of iron ions and the predominant diffusant was Fe3+ ions. The phase of the clusters approached γ-Fe2O3 as the annealing time increased. Mössbauer spectroscopy revealed that these clusters had magnetic moments and showed superparamagnetism above the blocking temperature. It has been shown that the dipole interaction between two nearest clusters is smaller by a factor of 1/7 than the magnetocrystalline anisotropy energy. This indicates that the direction of the magnetic moment is predominantly determined by the magnetocrystalline anisotropy below the blocking temperature.</jats:p>

DOI： 10.1063/1.363762

researchmap

記述言語：英語   掲載種別：研究論文（学術雑誌）  

DOI： 10.1007/bf02652971

researchmap

記述言語：英語  

DOI： 10.2355/isijinternational.45.1754

Web of Science

researchmap

researchmap

記述言語：英語  

DOI： 10.2355/isijinternational.45.1754

Web of Science

researchmap

開催年月日： 2024年9月

記述言語：日本語   会議種別：口頭発表（一般）  

開催地：大阪大学豊中キャンパス   国名：日本国  

researchmap

開催年月日： 2024年9月

記述言語：英語   会議種別：口頭発表（一般）  

開催地：The University of Oosaka   国名：日本国  

researchmap

開催年月日： 2024年9月

記述言語：日本語  

開催地：大阪大学豊中キャンパス   国名：日本国  

researchmap

開催年月日： 2024年9月

記述言語：日本語   会議種別：ポスター発表  

国名：日本国  

researchmap

開催年月日： 2024年6月

記述言語：英語   会議種別：ポスター発表  

researchmap

開催年月日： 2024年6月

記述言語：英語   会議種別：ポスター発表  

researchmap

researchmap

researchmap

researchmap

researchmap

researchmap

researchmap

researchmap

researchmap