社団法人繊維学会

Polymer Processing Society

The Textile Machinery Society of Japan

The Japan Society of Polymer Processing

社団法人日本繊維機械学会   理事  

2002 - 2012   

Structural characterization of polypropylene/poly(lactic acid) bicomponent meltblown Reviewed

Selven Rungiah, Renukarn Ruamsuk, Philippe Vroman, Wataru Takarada, Jean-Christophe Appert-Collin, Takeshi Kikutani

JOURNAL OF APPLIED POLYMER SCIENCE   134 ( 14 )   2017.4

Fiber Structure Development of PHBH through Stress-Induced Crystallization in High-Speed Melt Spinning Process Reviewed

Qing Qin, Wataru Takarada, Takeshi Kikutani

JOURNAL OF FIBER SCIENCE AND TECHNOLOGY   73 ( 2 )   49 - 60   2017.2

Multiple Melting Behavior of High-Speed Melt Spun Polylactide Fibers Reviewed

Midori Takasaki, Natsumi Fukushi, Miku Yoshizawa, Shota Onosato, Motohiro Hanada, Wataru Takarada, Yutaka Kawahara, Takeshi Kikutani, Haruki Kobayashi, Katsufumi Tanaka

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS   56 ( 3 )   143 - 160   2017

Effect of Processing Conditions on Heat Seal Strength for Peelable Heat Sealing of Multilayered Polyethylene Films with Different Sealant Layers Reviewed

Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS   56 ( 9 )   709 - 723   2017

Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films Reviewed

Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani

JOURNAL OF POLYMER ENGINEERING   36 ( 9 )   909 - 916   2016.11

Effect of Cross-Sectional Configuration on Fiber Formation Behavior in the Vicinity of Spinning Nozzle in Bicomponent Melt Spinning Process Reviewed

Yiwen Chen, Wataru Takarada, Takeshi Kikutani

JOURNAL OF FIBER SCIENCE AND TECHNOLOGY   72 ( 7 )   154 - 159   2016.7

Alkaline Hydrolysis Kinetics of Poly(ethylene terephthalate) Fibers Reviewed

Yutaka Kawahara, Taiyo Yoshioka, Wataru Takarada, Takeshi Kikutani, Masaki Tsuji

JOURNAL OF FIBER SCIENCE AND TECHNOLOGY   72 ( 1 )   9 - 16   2016.1

Mutual Interaction between High and Low Stereo-regularity Components for Crystallization and Melting Behaviors of Polypropylene Blend Fibers Reviewed

Kouya Kawai, Youhei Kohri, Wataru Takarada, Tomoaki Takebe, Toshitaka Kanai, Takeshi Kikutani

PROCEEDINGS OF PPS-31: THE 31ST INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY   1713   2016

Melt-blowing Conditions for Preparing Webs Consisting of Fine Fibers Reviewed

Ruamsk Renukarn, Wataru Takarada, Takeshi Kikutani

PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 - POLYMER PROCESSING SOCIETY PPS: CONFERENCE PAPERS   1779   2016

Effect of Drawing Speed on Infusion and Drawing Behaviors of Poly(ethylene terephthalate) Filaments upon Cold Drawing in Ethanol Reviewed

Rina Khanum, Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani

SEN-I GAKKAISHI   71 ( 9 )   273 - 283   2015.9

Role of ethanol concentration on drawing and infusion behavior of poly(ethylene terephthalate) filaments upon cold drawing Reviewed

Rina Khanum, Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani

POLYMER   70   19 - 29   2015.7

Fabrication of Fiber-Reinforced Single-Polymer Composites through Compression Molding of Bicomponent Fibers Prepared by High-Speed Melt Spinning Process Reviewed

Yuan Jing Zhang, Wataru Takarada, Takeshi Kikutani

SEN-I GAKKAISHI   71 ( 5 )   172 - 179   2015.5

Structure and properties of low-isotacticity polypropylene elastomeric fibers prepared by sheath-core bicomponent spinning: effect of localization of high-isotacticity component near the fiber surface Reviewed

Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani

JOURNAL OF POLYMER ENGINEERING   35 ( 3 )   277 - 285   2015.4

Crystallization of poly(ethylene terephthalate) filaments by infusion of ethanol upon cold drawing Reviewed

Rina Khanum, Wataru Takarada, Arun Aneja, Takeshi Kikutani

POLYMER   59   26 - 34   2015.2

Effect of Polymer Viscosities on the Fiber Structure and Membrane Properties of Polypropylene/Polyethylene Bicomponent Hollow Fibers Reviewed

Satoshi Sugiura, Wataru Takarada, Takeshi Kikutani

PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY   1664   2015

Fiber Structure Formation in Melt Spinning of Bio-Based Aliphatic Co-polyesters Reviewed

Qing Qin, Wataru Takarada, Takeshi Kikutani

PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY   1664   2015

Structure and Properties of Low-Isotacticity Polypropylene Elastomeric Fibers Prepared by Sheath-Core Bicomponent Spinning - Effect of the Composition of Sheath Layer with Constant High-Isotacticity Polypropylene Content Reviewed

Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani

SEN-I GAKKAISHI   70 ( 9 )   203 - 212   2014.9

Compliant electrostatic chuck based on hairy microstructure (vol 22, 015019, 2013) Reviewed

Shigeki Saito, Takeshi Kikutani, Kunio Takahashi, Wataru Takarada, Fumiaki Soda, Kenji Sawai, Radon Dhelika

SMART MATERIALS AND STRUCTURES   23 ( 7 )   2014.7

Morphology and Crystallization Behavior of Nylon 6-Clay/Neat Nylon 6 Bicomponent Nanocomposite Fibers Reviewed

Shahin Kazemi, Mohammad Reza Mohaddes Mojtahedi, Wataru Takarada, Takeshi Kikutani

JOURNAL OF APPLIED POLYMER SCIENCE   131 ( 6 )   2014.3

Electrostatic chuck consisting of polymeric electrostatic inductive fibers for handling of objects with rough surfaces Reviewed

Radon Dhelika, Kenji Sawai, Kunio Takahashi, Wataru Takarada, Takeshi Kikutani, Shigeki Saito

Smart Materials and Structures   22 ( 9 )   2013.9

Compliant electrostatic chuck based on hairy microstructure Reviewed

Shigeki Saito, Fumiaki Soda, Radon Dhelika, Kunio Takahashi, Wataru Takarada, Takeshi Kikutani

SMART MATERIALS AND STRUCTURES   22 ( 1 )   2013.1

Mechanism of surface roughness development in melt spinning of blend fibers for artificial hair Reviewed

Xiaoshi Xu, Yutaka Shirakashi, Junya Ishibashi, Wataru Takarada, Takeshi Kikutani

TEXTILE RESEARCH JOURNAL   82 ( 13 )   1382 - 1389   2012.8

Effect of the Control of Polymer Flow in the Vicinity of Spinning Nozzle on Mechanical Properties of Poly(ethylene terephthalate) Fibers

M. Masuda, W. Takarada, T. Kikutani

INTERNATIONAL POLYMER PROCESSING   25 ( 2 )   159 - 169   2010.5

Stacked-Lamellar Structure in High-Speed Spun PET Fibers as Revealed by TEM Reviewed

Taiyo Yoshioka, Yutaka Kawahara, Takeshi Kikutani, Masaki Tsuji

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS   49 ( 1 )   155 - 162   2010

Molecular Weight Dependence of Fiber Structure Development in the Laser Drawing of Poly(ethylene terephthalate) Fibers Reviewed

Kyoung Hou Kim, Takayoshi Yamaguchi, Yutaka Ohkoshi, Yasuo Gotoh, Masanobu Nagura, Hiroshi Urakawa, Masaru Kotera, Takeshi Kikutani

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS   47 ( 17 )   1653 - 1665   2009.9

On-line Measurement Studies on Orientation Development and Characteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber

W-G Hahm, W. Takarada, H. Ito, T. Kikutani

INTERNATIONAL POLYMER PROCESSING   24 ( 3 )   280 - 287   2009.7

Effect of Nozzle Diameter on Mechanical Properties of Poly(ethylene terephthalate) Fibers Prepared in Melt Spinning Process Reviewed

Masato Masuda, Wataru Takarada, Takeshi Kikutani

SEN-I GAKKAISHI   65 ( 4 )   118 - 126   2009.4

Polymer structure and properties in micro- and nanomolding process

Hiroshi Ito, Hajime Suzuki, Kunihiko Kazama, Takeshi Kikutani

CURRENT APPLIED PHYSICS   9 ( 2 )   E19 - E24   2009.3

9,9-Diarylfluorene-Based Poly(alkyl aryl ether)s: Synthesis and Property

Hideki Hayashi, Masayo Takizawa, Takayuki Arai, Keisuke Ikeda, Wataru Takarada, Takeshi Kikutani, Yasithito Koyama, Toshikazu Takata

POLYMER JOURNAL   41 ( 8 )   609 - 615   2009

Fiber formation, structure and properties of a new type of polyether-ester elastomeric fibers Reviewed

Takeshi Kikutani

PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2   1 - 1   2009

溶融紡糸ポリエチレンテレフタレート繊維の力学特性に対するノズル径の影響

増田正人, 宝田亘, 鞠谷雄士

繊維学会誌   65 ( 4 )   118 - 126   2009

High-speed melt spinning of nanoparticle-filled high molecular weight poly(ethylene terephthalate)

K. H. Jang, B. C. Kim, W. G. Hahm, T. Kikutani

INTERNATIONAL POLYMER PROCESSING   23 ( 4 )   370 - 376   2008.9

Small-angle X-ray scattering study on the tensile fracture process of poly(ethylene terephthalate) fiber

Masatoshi Shioya, Tomomi Kawazoe, Ryota Okazaki, Takumi Suei, Shinichi Sakurai, Katsuhiro Yamamoto, Takeshi Kikutani

MACROMOLECULES   41 ( 13 )   4758 - 4765   2008.7

Fiber structure development in high-speed melt spinning of poly(trimethylene terephthalate) (PTT) - On-line measurement of birefringence

Kyoung Hou Kim, Hyun Hok Cho, Hiroshi Ito, Takeshi Kikutani

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS   46 ( 9 )   847 - 856   2008.5

Development of bicomponent spunbond nonwoven webs consisting of ultra-fine splitted fibers

C. Prahsarn, A. Matsubara, S. Motomura, T. Kikutani

INTERNATIONAL POLYMER PROCESSING   23 ( 2 )   178 - 182   2008.5

New insights into lamellar structure development and SAXS/WAXD sequence appearance during uniaxial stretching of amorphous poly(ethylene terephthalate) above glass transition temperature

Daisuke Kawakami, Christian Burger, Shaofeng Ran, Carlos Avila-Orta, Igors Sics, Benjamin Chu, Shu-Min Chiao, Benjamin S. Hsiao, Takeshi Kikutani

MACROMOLECULES   41 ( 8 )   2859 - 2867   2008.4

Effect of the Blending of Low Stereo-regularity Component in High-Speed Melt Spinning of Polypropylene

KOHRI Yohei, TAKARADA Wataru, ITO Hiroshi, TAKEBE Tomoaki, MINAMI Yutaka, KANAI Toshitaka, KIKUTANI Takeshi

Seikei-Kakou   20 ( 11 )   831 - 839   2008

Effect of vibration on drawing and annealing of high-speed spun poly(trimethylene terephthalate) fiber Reviewed

Kyoung Hou Kim, Yang Hun Lee, Hyun Hok Cho, Takeshi Kikutani

E-POLYMERS   2007.2

Effects of process conditions on surface replication and higher-order structure formation in micromolding

Hiroshi Ito, Kunihiko Kazama, Takeshi Kikutani

MACROMOLECULAR SYMPOSIA   249   628 - 634   2007

Fundamental study on fabrication of GI-optical fibers utilizing diffusion of low molar mass additive in melt spinning process Reviewed

Yasutaka Kato, Hiroshi Ito, Takeshi Kikutani

PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS VOLS 1 AND 2   4 - 4   2007

Analysis of necking deformation behavior in high-speed in-line drawing process of PET by on-line diameter and velocity measurements

W-G. Hahm, H. Ito, T. Kikutani

INTERNATIONAL POLYMER PROCESSING   21 ( 5 )   536 - 543   2006.11

Small-angle X-ray scattering of long-period structures forming bundles

M Shioya, T Kawazoe, J Kojima, S Sakurai, K Yamamoto, T Kikutani

POLYMER   47 ( 10 )   3616 - 3628   2006.5

Structural development and properties of melt spun poly(butylene succinate) and poly(butylene terephthalate-co-succinate-co-adipate) biodegradable fibers

XQ Shi, M Takasaki, H Ito, T Kikutani

INTERNATIONAL POLYMER PROCESSING   21 ( 1 )   64 - 69   2006.3

Oligomer deposition on the surface of PET fiber in supercritical carbon dioxide fluid

Y Kawahara, M Kamo, K Yamamoto, S Ogawa, D Terada, T Kikutani, M Tsuji

MACROMOLECULAR MATERIALS AND ENGINEERING   291 ( 1 )   11 - 15   2006.1

Fixation of silane and film fortner to p-aramid fiber with nano-controlled slits for interfacial reinforcement Reviewed

Nobuo Ikuta, Fumiyasu Funami, Akihiro Ohnishi, Takeshi Kikutani, Kazuhiko Kosuge

DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES   263 - 269   2006

Fiber Structure Development and Crimp Formation in Bicomponent Fibers Prepared from Post-Consumer Poly (ethylene terephthalate) Bottles

YAMAMOTO Kiyoshi, KATAGIRI Masahiro, FURUTA Hirokazu, ITO Hiroshi, KIKUTANI Takeshi

Journal of the Japan Society of Polymer Processing   18 ( 1 )   80 - 86   2006

Experimental study on factors influencing throughput rate and process of polymer-mineral filler mixing in a twin screw extruder

J Ishibashi, T Kikutani

INTERNATIONAL POLYMER PROCESSING   20 ( 4 )   388 - 397   2005.12

Characterization on mixed-crystal structure and properties of poly (butylene adipate-co-terephthalate) biodegradable fibers

XQ Shi, H Ito, T Kikutani

POLYMER   46 ( 25 )   11442 - 11450   2005.11

High-speed melt spinning of syndiotactic-polystyrene; Improvement of spinnability and fiber structure development via bicomponent spinning with atactic-polystyrene

Y Hada, H Shikuma, H Ito, T Kikutani

JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS   B44 ( 4 )   549 - 571   2005.7

Structure and properties of syndiotactic polystyrene fibers prepared in high-speed melt spinning process

Y Hada, H Shikuma, H Ito, T Kikutani

FIBERS AND POLYMERS   6 ( 1 )   19 - 27   2005.3

Control of high-order structure of poly(ethylene terephthalate) fibers by blending with liquid crystalline polymer

J Kojima, T Kikutani

SEN-I GAKKAISHI   61 ( 2 )   29 - 37   2005.2

Internal fine structures in the high-speed-spun fibers of poly(ethylene 2,6-naphthalene dicarboxylate)

T Yoshioka, M Tsuji, Y Kawahara, T Kikutani, S Kohjiya

POLYMER   46 ( 6 )   1886 - 1892   2005.2

Characterization on mixed-crystal structure of poly(butylene terephthalate/succinate/adipate) biodegradable copolymer fibers

XQ Shi, K Aimi, H Ito, S Ando, T Kikutani

POLYMER   46 ( 3 )   751 - 760   2005.1

Fundamental Study on Structure Development of Thin-Wall Injection Molded Parts

Hiroshi Ito Yusuke, Yagisawa, Takushi Saito, Toshiyuki Yasuhara, Takeshi Kikutani, Yoshitoshi Yagisawa

Thoretical and Applied Mechanics Japan   54   263 - 268   2005

Mechanical properties of poly(ethylene terephthalate) fiber produced by conjugate melt spinning with polystyrene and CO2 laser-heated drawing

K Nakata, Y Ohkoshi, Y Gotoh, M Nagura, Y Funatsu, T Kikutani

SEN-I GAKKAISHI   60 ( 11 )   352 - 355   2004.11

Fiber property and structure development of polyester blend fibers reinforced with a thermotropic liquid-crystal polymer

JY Kim, SH Kim, T Kikutani

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS   42 ( 3 )   395 - 403   2004.2

Effect of CO_2 Laser Irradiation in Spinline on Mechanical Properties of Poly(ethylene terephthlate) Fibers

MASUDA Masato, FUNATSU Yoshitsugu, KAZAMA Kunihiko, KIKUTANI Takeshi

Sen-ito Kogyo   60 ( 11 )   338 - 345   2004

超臨界二酸化炭素処理によるポリエステル繊維の構造変化

寺田堂彦, 河原豊, 鞠谷雄士, 岩本正治

繊学誌   60 ( 12 )   357 - 364   2004

高速紡糸ポリエチレンテレフタレート繊維のシンクロトロンＸ線散乱法による精密構造解析

舩井栄志, 櫻井伸一, 原滋郎, 山本勝宏, 岡本茂, 小島潤一, 鞠谷雄士

繊学誌   60 ( 11 )   322 - 330   2004

押出装置内におけるpoly(ethylene terephthalate)の分解挙動の解析

千塚健史, 鞠谷雄士

繊学誌   60 ( 11 )   331 - 337   2004

Interfacial properties of PP/PP composites

T Kitayama, S Utsumi, H Hamada, T Nishino, T Kikutani, H Ito

JOURNAL OF APPLIED POLYMER SCIENCE   88 ( 13 )   2875 - 2883   2003.6

Effects of annealing on structure and properties of TLCP/PEN/PET ternary blend fibers

JY Kim, ES Seo, SH Kim, T Kikutani

MACROMOLECULAR RESEARCH   11 ( 1 )   62 - 68   2003.2

Structure Development of Polylactides with Various D-Lactide Contents in the High-Speed Melt Spinning Process

Midori Takasaki, Hiroshi Ito, Takeshi Kikutani

J. Macromol. Sci., Phys.   B42 ( 1 )   59 - 75   2003

Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes

M.Takasaki, H.Ito, T.Kikutani

J. Macromol. Sci.-Phys.   42 ( 3 & 4 )   403 - 420   2003

Fiber structure formation and physical properties of poly(butylene terephthalate) fibers in high-speed melt spinning

Sun Hee Lee, Kyoung Hou Kim, Takeshi Kikutani, Hyun, Hok Cho

e-Polymers   2003 ( 27 )   1 - 12   2003

交互積層構造を有する干渉発色繊維の色相の変化

熊沢金也, 高橋秀和, 田畑洋, 吉村三枝, 清水進, 鞠谷雄士

繊維学会誌   59 ( 10 )   392 - 400   2003

Formation and Structure of High Mechanical Performance Fibers. II. Flexible Polymers

TAKESHI KIKUTANI

J. Appl. Polym. Sci.   83 ( 3 )   559 - 571   2002

Dynamics and Evolution of Structure in Fiber Extrusion

Jiro Shimizu, Takeshi Kikutani

J. Appl. Polym. Sci.   83 ( 3 )   539 - 558   2002

顕微レーザーラマン分光法によるＰＥＴ繊維の構造解析

寺田堂彦, 河原豊, 岩本正治, 鞠谷雄士

繊維学会誌   58 ( 9 )   342 - 345   2002

Permagnetic Etching of Poly(ethylene terephthalate) Fibers

T.Yoshioka, M.Tsuji Y.kawahara, S.Koujiya, T.Kikutani

Sen'i Gakkaishi   58 ( 7 )   268 - 272   2002

交互積層構造を有する干渉発色繊維の変角反射特性

熊澤金也, 高橋秀和, 田畑洋, 吉村三枝, 清水進, 鞠谷雄士

繊維学会誌   58 ( 6 )   195 - 201   2002

PP/PP同種異形態複合材料の力学特性

北山威夫, 石倉健太郎, 濱田泰以, 鞠谷雄士, 伊藤浩志

成形加工   14 ( 10 )   663 - 670   2002

Morphology of High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate) Fiber and Its Structural Chnages by the Treatment in Supercritical Carbon Dioxide Fluid

Yutaka kawahara, Taiyo Yoshioka, masaki Tsuji, Takeshi Kikutanim, Kazuaki Sugiuram, Satoshi Ogawa

J. Macromo. Sci.-Phys.   B41 ( 1 )   177 - 184   2002

Studies on high-speed melt spinning of noncircular cross-section fibers. III. Modeling of melt spinning process incorporating change in cross-sectional shape

W Takarada, H Ito, T Kikutani, N Okui

JOURNAL OF APPLIED POLYMER SCIENCE   80 ( 9 )   1589 - 1600   2001.5

Studies on high-speed melt spinning of noncircular cross-section fibers. II. On-line measurement of the spin line, including change in cross-sectional shape

W Takarada, H Ito, T Kikutani, N Okui

JOURNAL OF APPLIED POLYMER SCIENCE   80 ( 9 )   1582 - 1588   2001.5

The Application of an Integral Type Constitutive Equation to Numerical Flow Analyses of Viscoelastic Fluid in Unsteady Flow

Y. Shiraishi, N.Narazaki, T.Kikutani

Polymer Eng. & Sci.   41 ( 10 )   1695 - 1704   2001

Analysis of Flow Behavior and Resultant Network Structure in Uniaxial and Biaxial Elongation of PEN

H.Ito K.Suzuki, T.Kikutani, K.Nakayama

Proceedings of ANTEC 2001   (CD-ROM : 729)   2001

Mechanical Properties of PP/PP Composites

T.Kitayama K.Ishikura, H.Hamada, T.Kikutani H.Ito

Proceedings of ANTEC 2001   (CD-ROM :694)   2001

Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers

Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui

J. Appl. Polym. Sci.   80 ( 9 )   1575   2001

Dyeing Behavior of High-Speed Spun Poly(ethylene terephthalate) Fibers in Supercritical Carbon Dioxide

Yutaka Kawahara, Taiyo Yoshioka, Kazuaki Sugiura, Satoshi Ogawa, Takeshi Kikutani

J. Macromol. Sci.-Physics   B40 ( 2 )   189 - 197   2001

超臨界二酸化炭素処理したポリエチレンテレフタレート繊維の構造

河原豊, 杉浦和明, 小川賢, 鞠谷雄士

繊維学会誌   57 ( 7 )   220 - 223   2001

Dyeing behaviour of poly(ethylene terephthalate) fibres in supercritical carbon dioxide

Y.Kawahara, T.Kikutani, K.Sugiura, S.Ogawa

Color. Technol.   117 ( 5 )   266 - 269   2001

Cooling behavior in the spinline of poly(ether ether keton)

Yutaka Ohkoshi, Changkyung Park, Yasuo Gotoh, Masanobu Nagura, Koichiro Toriumi, Takeshi Kikutani

Sen'i Gakkaishi   56 ( 7 )   340 - 347   2000

Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-Speed Spinning I Polyethylene Sheath/Poly(ethylene terephthalate) Core Fibers

H.H.Cho, K.H.Kim, Y.A.Kang, H.Ito T.Kikutani

J.Appl.Polym.Sci.   77 ( 10 )   2254   2000

Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-Speed Spinning II Poly(ethylene terephthalate) Sheath/ Polyethylene Core Fibers

H.H.Cho, K.H.Kim, Y.A.Kang, H.Ito T.Kikutani

J.Appl.Polym.Sci.   77 ( 10 )   2267 - 2277   2000

Fine-Structure and Physical Properties of Polyethylene Fibers in High-Speed Spinning I Effect of Melt-Flow Rate in the High-Density Polyethylene

H.H.Cho, K.H.Kim, H.Ito T.Kikutani

J.Appl.Polym.Sci.   77 ( 6 )   1182 - 1194   2000

Fine-Structure and Physical Properties of Polyethylene Fibers in High-Speed Spinning II Effect of Catalyst Systems in Linear Low-Density Polyethylene

H.H.Cho, K.H.Kim, H.Ito T.Kikutani

J.Appl.Polym.Sci.   77 ( 6 )   1195 - 1206   2000

Surface morphology of high-speed spun poly (ethylene terephthalate) fibers

Yutaka Kawahara, Masayoshi Ohara, Masaki Tsuji, Takeshi Kikutani

Journal of Textile Engineering   46 ( 1 )   5 - 6   2000

Diffusion of Organometallic Compounds into High-Speed Spun Poly(ethylene terephthalate) Fibers in Supercritical Carbon Dioxide Fluid

Y.Kawahara, T.Kikutani

J. Macromol. Sci., Phys.   B39   561 - 567   2000

Fiber Structure Development in High-speed Melt Spinning of Polyamide 6/Clay Nano-composite

E.Giza, H.Ito, T.Kikutani, N.Okui

J. Macromol. Sci., Phys.   B39   545 - 559   2000

Dyeing behavior of poly(ethylene terephthalate) fibers spun by high-speed melt spinning in supercritical carbon dioxide

Y Kawahara, K Sugiura, S Ogawa, T Kikutani

SEN-I GAKKAISHI   55 ( 12 )   613 - 616   1999.12

Fiber structure development in high-speed melt spinning of poly(ethylene terephthalate-co-ethylene 2,6-naphthalene dicarboxylate)

K Miyata, H Ito, T Kikutani, N Okui

JOURNAL OF POLYMER ENGINEERING   19 ( 6 )   395 - 418   1999.11

Structural analysis for commercial poly(ethylene terephthalate) fiber with longitudinal thickness fluctuation

Y Kawahara, T Kikutani, M Tsuji

SEN-I GAKKAISHI   55 ( 7 )   336 - 340   1999.7

Enhancement of fiber structure formation of a liquid crystalline copolyester via ultra-high speed bicomponent spinning with poly(ethylene terephthalate)

J Radhakrishnan, H Ito, T Kikutani, N Okui

POLYMER ENGINEERING AND SCIENCE   39 ( 1 )   89 - 98   1999.1

Structural Change of High-Speed Spun Poly(ethylene 2,6-naphthalene dicarboxylate) Fibers with Annealing, , , 55, 542-551 (1999)

K.Miyata, H.Ito, T.Kikutani, N.Okui

Sen’i Gakkaishi   55 ( 11 )   542 - 551   1999

Dyeing Behaviour of Poly(ethylene terephthalate) Fibres Spun by High-Speed Melt Spinning

Y.Kawahara, H.J.Jeon, T.Kikutani

JSDC   115   355 - 356   1999

On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process

T. Kikutani, K. Nakao, W. Takarada, H. Ito

Polym. Eng. Sci.   39 ( 12 )   2349 - 2357   1999

Fabrication of continuous fiber-reinforced thermoplastic composites with structural gradient from sheath-core type bicomponent fibers

T Furuta, J Radhakrishnan, H Ito, T Kikutani, N Okui

COMPOSITE INTERFACES   6 ( 5 )   451 - 466   1999

Effect of liquid isothermal bath in high-speed melt spinning of poly (ethylene 2,6-naphthalene dicarboxylate)

K Miyata, H Ito, T Kikutani, N Okui

SEN-I GAKKAISHI   54 ( 12 )   661 - 671   1998.12

Effect of metallic wire inserted in nozzle in high-speed melt spinning of poly(ethylene terephthalate)

HJ Jeon, H Ito, T Kikutani, N Okui, M Okamoto

JOURNAL OF APPLIED POLYMER SCIENCE   70 ( 4 )   665 - 674   1998.10

Structural analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fibers prepared by drawing and annealing processes

Y Furuhashi, H Ito, T Kikutani, T Yamamoto, M Kimizu, M Cakmak

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS   36 ( 14 )   2471 - 2482   1998.10

Control of Fiber Structure Using a Liquid Isothermal Bath in High-Speed Melt Spinning of Poly(vinylidene Fluoride)

Akira MURATA, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI

Seikei-Kakou   10 ( 7 )   554 - 562   1998

Effect of extraordinary large diameter nozzle in high-speed melt spinning of poly(ethylene terephthalate)

HJ Jeon, H Ito, T Kikutani, N Okui

SEN-I GAKKAISHI   53 ( 12 )   540 - 548   1997.12

High-speed melt spinning of sheath-core bicomponent polyester fibers: High and low molecular weight poly(ethylene terephthalate) systems

J Radhakrishnan, T Kikutani, N Okui

TEXTILE RESEARCH JOURNAL   67 ( 9 )   684 - 694   1997.9

Structural change of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fibers during heating process

Y Furuhashi, H Ito, T Kikutani, T Yamamoto, M Kimizu

SEN-I GAKKAISHI   53 ( 9 )   356 - 364   1997.9

Fiber structure formation in ultra-high-speed melt spinning of poly(ethylene 2,6-naphthalene dicarboxylate)

K Miyata, T Kikutani, N Okui

JOURNAL OF APPLIED POLYMER SCIENCE   65 ( 7 )   1415 - 1427   1997.8

The effect of drawing and annealing conditions on the structure and properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fibers

T Yamamoto, M Kimizu, T Kikutani, Y Furuhashi, M Cakmak

INTERNATIONAL POLYMER PROCESSING   12 ( 1 )   29 - 37   1997.3

Analysis of single-fiber pull-out from composites by using stress birefringence

M. Shioya, E. Mikami, T. Kikutani

Composite Interfaces   4 ( 6 )   429 - 445   1997.1

Tensile Behavior of Poly(ethylene terephthalate)/Polyethylene Bicomponent Fibers Prepared by High-Speed Melt Spinning

Han Seong KIM, Hyun Hok CHO, Hiroshi ITO Takeshi KIKUTANI Norimasa OKUI

Seikei-Kakou   9 ( 6 )   449 - 461   1997

Fabrication of Continuous Fiber-Reinforced Composites from Sheath-Core Type Bicomponent Fibers

古田達彦, J.Radhakrishnan, 伊藤浩志, 鞠谷雄士, 奥居徳昌

Seikei-Kakou   9 ( 11 )   920 - 926   1997

The thermal-bonding behaviour of polyethylene/poly(ethylene terephthalate) bicomponent fibres

H. S. Kim, H. Ito, T. Kikutani, N. Okui

Journal of the Textile Institute   88 ( 3 )   37 - 51   1997

High-speed melt spinning of bicomponent fibers: Mechanism of fiber structure development in poly(ethylene terephthalate)/polypropylene system

T Kikutani, J Radhakrishnan, S Arikawa, A Takaku, N Okui, Jin, X, F Niwa, Y Kudo

JOURNAL OF APPLIED POLYMER SCIENCE   62 ( 11 )   1913 - 1924   1996.12

Thinning behavior of the spinline in high-speed bicomponent spinning of high molecular weight and low molecular weight poly(ethylene terephthalate)

J Radhakrishnan, T Kikutani, N Okui

SEN-I GAKKAISHI   52 ( 11 )   618 - 622   1996.11

The model analysis of tensile stress distribution in the short-fiber embedded in thermoplastic composites

T. Kikutani, E. Mikami

Composite Interfaces   4 ( 1 )   1 - 9   1996.1

High-Speed Melt Spinning of PET - Mechanism of Fiber Structure Formation Using a Liquid Isothermal Bath as Modifier

T.Kikutani, J.Radhakrishnan, M.Sato, N.Okui A.Takaku

International Polymer Processing   X1 ( 1 )   42 - 49   1996

FIBER STRUCTURE DEVELOPMENT IN HIGH-SPEED MELT-SPINNING OF COPOLYESTERS - POLY(ETHYLENE TEREPHTHALATE-CO-1,4-CYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE)

T KIKUTANI, K MOROHOSHI, HY YOO, S UMEMOTO, N OKUI

POLYMER ENGINEERING AND SCIENCE   35 ( 11 )   942 - 949   1995.6

Fiber Structure Formation in High-Speed Melt Spinning of Sheath-Core Type Bicomponent Fibers

Takeshi Kikutani, Sadaaki Arikawa, Akira Takaku, Norimasa Okui

Sen'i Gakkaishi   51 ( 9 )   408 - 415   1995

Capturing of Real Image of Neck-Like Deformation from High-Speed Melt Spinning Line

Takeshi Kikutani, Naoki Ogawa, Norimasa Okui, Yutaka Kawahara

Sen'i Gakkaishi   50 ( 12 )   561 - 566   1994

Effect of Quenching and Annealing on fiber Pull-out from Crystalline Polymer Matrices(共著)

TAKESHI KIKUTANI

Advanced Composite Materials   1   2   1991

炭素繊維の直接通電加熱法による熱処理における伝熱

鞠谷雄士

炭素   1991   148   1991

直接通電加熱法による炭素繊維の熱処理

鞠谷雄士

炭素   1991   146   1991

Effect of Spinline Quenching on Structure Development in High-speed Melt Spinning of Polylethylene terephthalate)(共著)

TAKESHI KIKUTANI

International Polymer Processing   5   1   1990

An Experimental Technique for Characterizing Dispersion in Compounds of Particulates in Thermoplastics Using Small-angle Light Scattering

TAKESHI KIKUTANI

Colloid & Polymer Science   268   2   1990

Non-isothermal Orientation-induced Crystallizaion in Melt Spinning of Polypropylene

TAKESHI KIKUTANI

J. Appl. Polym. Sci.   37   1989

Diameter measurement in the vicinity of neck-like deformation in high-speed melt spinning process

Takeshi Kikutani, Takayuki Matsui, Akira Takaku, Jiro Shimizu

Sen'i Gakkaishi   45 ( 11 )   441 - 446   1989

高速紡糸過程中の糸温度測定と配向結晶化挙動の解析

鞠谷雄士

成形加工   1   3   1989

PETの高速紡糸におけるステアリン酸ナトリウムの結晶核形成剤としての作用

鞠谷雄士

繊維学会誌   44   7   1988

Handbook of Textile Fibre Structure Volume 2: Natural, Regenerated, Inorganic and Sprcialist Fibres

Woodhead Publishing Limited  2009 

Handbook of Textile Fibre Structure Volume 1: Fundamentals and Manufactured Polymer Fibres

Woodhead Publishing Limited  2009  （ ISBN:9781845693800 ）

成形品のオフライン複屈折計測法と計測事例

技術情報協会  2008 

PET繊維高強度化要因解析

シーエムシー出版  2008 

紡糸線制御によるPET繊維の高強度化

シーエムシー出版  2008 

レーザー照射溶融紡糸によるPET繊維の高強度化

シーエムシー出版  2008 

PET繊維化に及ぼす添加剤の効果

シーエムシー出版  2008 

PETの高分子量化と劣化抑制押出

シーエムシー出版  2008 

総論：高強度繊維開発

シーエムシー出版  2008 

成形プロセスにおけるオンライン複屈折計測法と計測事例

技術情報協会  2008 

プラスチック成形品の高次構造解析入門

日刊工業新聞社  2006 

Future Textiles －進化するテクニカル・テキスタイル－

繊維社  2006 

図解プラスチック成形材料

工業調査会  2006 

エコマテリアルハンドブック

丸善  2006 

基礎高分子科学

東京化学同人  2006 

PPS-21レポート（２）射出成形・金型，モルフォロジー・構造形成のセッションを中心に

プラスチックス・エージ  2005 

繊維ナノ構造制御-放射光による繊維構造解析

精密高分子技術, 監修 中浜精一, シーエムシー出版  2004 

繊維ナノ構造制御-溶融構造制御による高強度化

精密高分子技術, 監修 中浜精一, シーエムシー出版  2004 

繊維ナノ構造制御-総論

精密高分子技術, 監修 中浜精一, シーエムシー出版  2004 

疾走するファイバー(Beyond Fibers)

繊維学会・日本科学未来館編  2004 

紡糸・延伸

やさしい繊維の基礎知識, 繊維学会編, 日刊工業新聞社  2004 

流動場での結晶化を伴う高次構造形成

高分子材料・技術総覧,第２編 高分子材料の性質の制御,産業技術サービスセンター, 宮田清蔵監修  2004 

繊維化技術の基礎－概要

第３版繊維便覧，丸善  2004 

繊維化技術の材料科学－繊維構造形成

第３版繊維便覧，丸善  2004 

PPS-20レポート，繊維・フィルム，高分子成形加工における構造形成

プラスチックスエージ  2004 

ナノ構造制御ファイバーの創製

工業材料  2003 

国際ポリマー成形加工学会年次大会「ＰＰＳ－１９」レポート

プラスチックスエージ  2003 

紡糸・延伸

繊維学会誌  2003 

複合繊維と高速溶融紡糸

繊維機械学会誌  2003 

放射光による繊維構造解析

機能材料  2003 

溶融構造制御による高強度化

機能材料  2003 

高強度繊維開発の背景と研究計画

機能材料  2003 

国際ポリマー成形加工学会年次大会「PPS-18」レポート(2)

プラスチックスエージ  2002 

繊維の百科事典

丸善  2002 

伸長プロセスにおけるオンライン分子配向計測

成形加工  2002 

高強度繊維への挑戦－ポリエステル繊維の高強度化は可能か－

高分子  2001 

Polymer Fibers: Formation and Structure in Encyclopedia of Materials: Science and Technology

Elsevier Science Ltd.  2001 

Polymer Fiber Processing: Modeling : in Encyclopedia of Materials: Science and Technology

Elsevier Science Ltd.  2001 

Polymer Fibers: Formation and Structure in Encyclopedia of Materials: Science and Technology

Elsevier Science Ltd.  2001 

「ＰＰＳ－１７」年次大会レポート－プラスチック成形加工の潮流－

プラスチックス・エージ  2001 

PLASTICS AGE ENCYCLOPEDIA <進歩編> 2002, 成形加工における構造発現－伸長プロセス

プラスチックス・エージ  2001 

プラスチック成形品の高次構造解析（１２）－絡み合い構造解析－

成形加工  2001 

Challenge for High-Strength Fibers -Possibility of Developing High-Strength Polyester Fibers -

2001 

Polymer Fiber Processing: Modeling : in Encyclopedia of Materials: Science and Technology

Elsevier Science Ltd.  2001 

プラスチック成形品の高次構造解析（２）－回折・散乱による構造解析の基礎―

成形加工  2000 

プラスチック成形品の高次構造解析（７）－赤外吸収分光法，ラマン分光法，蛍光偏光法による分子配向解析―

成形加工  2000 

プラスチック成形品の高次構造解析（６）－広角Ｘ線回折による結晶配向解析－

成形加工  2000 

プラスチック成形品の高次構造解析（５）－複屈折測定の応用―

成形加工  2000 

プラスチック成形品の高次構造解析（４）－複屈折と分子配向の基礎－

成形加工  2000 

伸長プロセスの現状と課題

成形加工  2000 

プラスチック成形品の高次構造解析（９）－結晶化度の解析－

成形加工  2000 

国際高分子加工学会PPS-16レポート－繊維・フィルム，構造形成を中心に－

プラスチックスエージ  2000 

平成１１年度インテリジェントファイバー先導調査研究報告書

新エネルギー・産業技術総合開発機構  2000 

平成１０年度インテリジェントファイバー先導調査研究報告書

新エネルギー・産業技術総合開発機構  1999 

高速紡糸と繊維構造制御

高分子加工  1999 

Materials for Polymer Processing

Shiguma Shuppan  1998 

複合繊維の高速紡糸

成形加工  1998 

高分子の繊維化技術-合成繊維が獲得してきた性能と将来への課題-

繊維学会誌  1998 

成形加工におけるプラスチック材料(共著)

シグマ出版  1998 

High-Speed Melt Spinning of Bicomponent Fibers

Seikei-Kakou  1998 

Fiber Formation Technology for Polymers-Accomplished Technology and Future Direction of Synthetic Fibers

Sen'i Gakkaishi  1998 

Introduction of Materials Science

Baifu-kan  1997 

成形品構造形成(共著)

成形加工  1997 

材料科学への招待(分担)

培風館  1997 

Structure of Polymeric Materials

Kyoritsu Shuppan  1997 

Analysis Technique of Crystalline Structure

The Plastic  1997 

高分子の構造(分担)

共立出版  1997 

結晶構造の評価技術(共著)

合成樹脂  1997 

Structure Formation of Molded Polymers

Seikei-Kakou  1997 

新繊維科学(編、分担)

通商産業調査会  1995 

高速溶融紡糸過程のシミュレーション

繊維学会誌  1994 

溶融紡糸過程の計測技術

成形加工  1993 

High-speed Fiber Spinning

John Wiley and Sons  1985 

High-speed Fiber Spinning

John Wiley and Sons  1985 

Dream for Researches on Fibers Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   71 ( 1 )   P1 - P1   2015.1

International Symposium on Fiber Science and Technology 2014 (ISF2014) Reviewed

Takeshi Kikutani, Kunio Kimura, Toshiji Kanaya, Kunihiro Hamada, Akira Isogai, Sachiko Sukigara, Kaname Katsuraya, Hidetoshi Matsumoto

SEN-I GAKKAISHI   70 ( 12 )   P756 - P766   2014.12

Special Issue for the 70th Anniversary of the Society of Fiber Science and Technology, Japan Foreword Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   70 ( 9 )   P345 - P345   2014.9

Fiber Spinning Technology Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   70 ( 9 )   P388 - P391   2014.9

Researches for the Development of New Fibers Foreword Reviewed

Kikutani Takeshi

SEN-I GAKKAISHI   69 ( 2 )   P41   2013.2

IYC2011, JUCST and SFSTJ (Foreword) Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   67 ( 8 )   P213 - P213   2011.8

Professor James Lindsay White 1938-2009 Tribute Reviewed

Takeshi Kikutani

INTERNATIONAL POLYMER PROCESSING   25 ( 1 )   4 - 4   2010.3

Specialty Fibers Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   66 ( 3 )   P82 - P85   2010.3

Methods of Birefringence Measurement and Examples of Data Analysis Reviewed

Takeshi Kikutani, Wataru Takarada

SEN-I GAKKAISHI   66 ( 1 )   P39 - P44   2010.1

最近のフィルム成形技術の研究動向

鞠谷雄士

プラスチックス   61 ( 7 )   10 - 15   2010

せんいの強さに関わる技術課題

鞠谷雄士

繊維トレンド   82 ( 5, 6 )   66 - 71   2010

これからの高分子加工技術

鞠谷雄士

高分子   59 ( 3 )   129   2010

スペシャリティーファイバー

鞠谷雄士

繊維学会誌 繊維と工業   66 ( 3 )   P.82 - P.85   2010

Methods of Birefringence Measurement and Examples of Data Analysis

KIKUTANI TAKESHI, TAKARADA WATARU

Sen-ito Kogyo   66 ( 1 )   P-39 - P-44 - P.44   2010

International Conference ATC-10 Organized by Sen'i Gakkai Foreword Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   65 ( 4 )   P113 - P113   2009.4

Polymer Processing under Ultimate Conditions Reviewed

Takeshi Kikutani

SEN-I GAKKAISHI   65 ( 1 )   P2 - P4   2009.1

プラスチックの材料設計と成形加工性

鞠谷雄士

自動車技術   63 ( 4 )   72 - 77   2009

超高強度繊維

鞠谷雄士

工業材料   57 ( 1 )   50 - 51   2009

高分子材料の極限加工

鞠谷雄士

繊維学会誌   65 ( 1 )   P.2 - P.4   2009

Material Design and Processability of Plastics

TAKESHI KIKUTANI

Journal of Society of Automotive Engineers of Japan   63 ( 4 )   72 - 77   2009

紡糸・フィルム成形 －10年間の科学・技術の進歩－

鞠谷雄士

成形加工   20 ( 8 )   509 - 513   2008

Topics of new technologies: Development of high-strength polyester fibers through melt spinning with laser irradiation

Journal of Japan Laser Processing Society   15 ( 2 )   128 - 132   2008

ひろがる繊維の世界

鞠谷雄士

洗濯の科学   53 ( 2 )   24 - 32   2008

繊維構造の形成機構と高性能繊維の開発

鞠谷雄士

繊維学会誌   63 ( 12 )   417 - 422   2007

プラスチックの材料設計と成形加工性

鞠谷雄士

ポリファイル   44 ( 525 )   18 - 22   2007

Structure change of PET fiber during tensile deformation up to fracture

Masatoshi SHIOYA, Tomomi KAWAZOE, Ryota OKAZAKI, Takumi SUEI, Junichi KOJIMA, Shinichi SAKURAI, Katsuhiro YAMAMOTO, Takeshi KIKUTANI

Photon Factory Activity Report   Vol. ( 24 )   105   2007

Structure change of PET fiber during tensile deformation up to fracture

Masatoshi SHIOYA, Tomomi KAWAZOE, Ryota OKAZAKI, Takumi SUEI, Junichi KOJIMA, Shinichi SAKURAI, Katsuhiro YAMAMOTO, Takeshi KIKUTANI

Photon Factory Activity Report   Vol. ( 24 )   105   2007

位相差フィルムにおける厚さと複屈折の測定

鞠谷雄士, 伊藤浩志

マテリアルステージ   5 ( 11 )   51 - 59   2006

On-line Analysis of Stress and Birefringence Development in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)

Hiroshi Ito Takahiro, Suzuki Takeshi Kikutani, Kazuo Nakayama

ANTEC 2000 tech. paper,Orlando, USA   919   2000

On-line Analysis of Stress and Birefringence Development in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)

Hiroshi Ito Takahiro, Suzuki Takeshi Kikutani, Kazuo Nakayama

ANTEC 2000 tech. paper,Orlando, USA   919   2000

21世紀の繊維科学の夢－シングルステップファブリケーションの可能性を探る

鞠谷雄士

染色研究   43 ( 4 )   89 - 96   1999

高速紡糸過程の解析と繊維構造制御

鞠谷雄士

繊維学会誌   55(11)   391 - 396   1999

Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite

T. Kikutani, E. Giza, H. Ito, N. Okui

Polymer Processing Society, Asia-Australia Regional Meeting   253 - 254   1999

Orientation-crystallization in High-speed Spinning Process

TAKESHI KIKUTANI

Symposium on Polymer Crystallization, Morphology and Fiber Structure Development, Annual Meeting of the Society of Fiber Science and Technology, Japan, Sen'i Gakkai Symp.   S-21-S-24   1999

Molecular Orientation and Crystallization in Fiber Processing

TAKESHI KIKUTANI

Gordon Conference, CAE in Polymer Processing, Ventura, USA   1999

Analysis of Flow Behavior and Resultant Network Structure in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)（共著）

Hiroshi Ito Takahiro, Suzuki Takeshi Kikutani Norimasa Okui, Kazuo Nakayama

Proceedings of the 15th Polymer Processing Society Annual Meeting   Rheology, 28   1999

High-Speed Melt Spinning of polyamide 6/Poly(ethylene terephthalate) Bicomponent Fibers(共著）

Jeong Hung Joon, H.Ito T.Kikutani

Proceedings of the 15th Polymer Processing Society Annual Meeting   Film and Fibre, 19   1999

Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite

T. Kikutani, E. Giza, H. Ito, N. Okui

Polymer Processing Society, Asia-Australia Regional Meeting   253 - 254   1999

Orientation-crystallization in High-speed Spinning Process

TAKESHI KIKUTANI

Symposium on Polymer Crystallization, Morphology and Fiber Structure Development, Annual Meeting of the Society of Fiber Science and Technology, Japan, Sen'i Gakkai Symp.   S-21-S-24   1999

Molecular Orientation and Crystallization in Fiber Processing

TAKESHI KIKUTANI

Gordon Conference, CAE in Polymer Processing, Ventura, USA   1999

Analysis of Flow Behavior and Resultant Network Structure in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)（共著）

Hiroshi Ito Takahiro, Suzuki Takeshi Kikutani Norimasa Okui, Kazuo Nakayama

Proceedings of the 15th Polymer Processing Society Annual Meeting   Rheology, 28   1999

High-Speed Melt Spinning of polyamide 6/Poly(ethylene terephthalate) Bicomponent Fibers(共著）

Jeong Hung Joon, H.Ito T.Kikutani

Proceedings of the 15th Polymer Processing Society Annual Meeting   Film and Fibre, 19   1999

Development of Structure in High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate)Fibers under Different Spinning Conditions(共著)

K.Miyata, N.J.Terrill, A.J.Ryan, H.Ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   590 - 591   1998

Fabrication of TLCP Reinforced Composites with Structural Gradient From Sheath-core Bicomponeut Fibers(共著)

T.Furuta, J.Radhakrishnan, H.Ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   780 - 781   1998

Control of Fiber Structure Development of Poly(ethylene terephthalate)by High-speed Coextrusion Fiber Spinning with Polystyrene(共著)

J.Radhakrishnan, H.ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   705 - 706   1998

Development of Structure in High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate)Fibers under Different Spinning Conditions(共著)

K.Miyata, N.J.Terrill, A.J.Ryan, H.Ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   590 - 591   1998

Fabrication of TLCP Reinforced Composites with Structural Gradient From Sheath-core Bicomponeut Fibers(共著)

T.Furuta, J.Radhakrishnan, H.Ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   780 - 781   1998

Control of Fiber Structure Development of Poly(ethylene terephthalate)by High-speed Coextrusion Fiber Spinning with Polystyrene(共著)

J.Radhakrishnan, H.ito T.Kikutani, N.Okui

Proceedings of the 14th Polymer Processing Society Annual Meeting   705 - 706   1998

Fabrication of TLCP Reinforced Composites from Sheath-Core Bicomponent Fibers (共著）

Takeshi KIKUTANI, Tatsuhiko FURUTA, J. RADHAKRISHNAN, Hiroshi ITO, Norimasa OKUI

Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia   196   1997

Ultra High-Speed Spinning of Sheath-Core Type Bicomponent Fibers of a Liquid Crystalline Polyester: Poly(ethylene terephthalate-co-hydroxybenzoic acid)(PET/60PHB) and Poly(ethylene terephthalate)(共著）

J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI Norimasa OKUI

Proceedings of the 13th Polymer Processing Society Annual Meeting   7F   1997

Modelling and Numerical Simulation of Polymer Crystallization in Injection Molding Process(共著)

Hiroshi Ito, Takeshi Kikutani, Kazumi Tada, Kiyohito Koyama

Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997   KN3-2   1997

Structural Change of High-speed Spun Poly(ethylene 2,6-naphthalene dicarboxylate)Fibers on Annealing(共著)

Ken MIYATA, Hiroshi ITO Takeshi, KIKUTANI Norimasa OKUI

Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997   1P10   1997

Control of Fiber Strucutre Development of a Liquid Crystalline Polyester via High-Speed Coextrusion Fiber Spinning with Poly(ethylene terephthalate)（共著）

J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI Norimasa OKUI

Proceedings of 6th SPSJ International Polymer Conference   273 - 274   1997

Fabrication of TLCP Reinforced Composites from Sheath-Core Bicomponent Fibers (共著）

Takeshi KIKUTANI, Tatsuhiko FURUTA, J. RADHAKRISHNAN, Hiroshi ITO, Norimasa OKUI

Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia   196   1997

Ultra High-Speed Spinning of Sheath-Core Type Bicomponent Fibers of a Liquid Crystalline Polyester: Poly(ethylene terephthalate-co-hydroxybenzoic acid)(PET/60PHB) and Poly(ethylene terephthalate)(共著）

J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI Norimasa OKUI

Proceedings of the 13th Polymer Processing Society Annual Meeting   7F   1997

Modelling and Numerical Simulation of Polymer Crystallization in Injection Molding Process(共著)

Hiroshi Ito, Takeshi Kikutani, Kazumi Tada, Kiyohito Koyama

Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997   KN3-2   1997

Structural Change of High-speed Spun Poly(ethylene 2,6-naphthalene dicarboxylate)Fibers on Annealing(共著)

Ken MIYATA, Hiroshi ITO Takeshi, KIKUTANI Norimasa OKUI

Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997   1P10   1997

Control of Fiber Strucutre Development of a Liquid Crystalline Polyester via High-Speed Coextrusion Fiber Spinning with Poly(ethylene terephthalate)（共著）

J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI Norimasa OKUI

Proceedings of 6th SPSJ International Polymer Conference   273 - 274   1997

Heat Transfer during Heat-treatment of Carbon Fibers by Direct Currenting(共著)

TAKESHI KIKUTANI

Carbon   1991   148   1991

Heat-treatment of canbon Fibers by Direct Currenting(共著)

TAKESHI KIKUTANI

Carbon   1991   146   1991

Measurement of Filament Temperature and Analysis of Orientation-induced Crystallization Behavior in High-speed Melt Spinning Process

TAKESHI KIKUTANI

1   3   1989

Effect of Sodium Stearate as a Nucleating Additive in High-speed Melt Spinning of Polylethylene terephthalate)

TAKESHI KIKUTANI

44   7   1988

Development of high-strength PET fibers using spin-line drawing system

The Fiber Society Fall Annual Meeting and Technical Conference  2007 

Effect of CO2 gas laser irradiation in melt spinning process on mechanical properties of PET fibers

2004 

Utilization of Melt Spinning Process for the Preparation of Fibers with Optical Functionality

Advanced Polymeric Materials and Technology Symposium (APMT2010)  2010 

Melt spinning of poly(ethylene terephthalate) using water-quenching bath placed at extremely short air-gap length

The Fiber Society Fall Annual Meeting and Technical Conference  2007 

Fiber structure development in high-speed melt spinning of atactic-PS/syndiotactic-PS bicomponent fibers with various cross-sectional configurations

2004 

高強度繊維開発

繊維学会秋季研究発表会  2007 

Structure modification of PET in supercritical carbon dioxide fluid

2004 

Preparation of Elastomeric Fibers by Melt Spinning of Polypropylenes of Low Stereo-regularity

5th Pacific Rim Conference on Rheology (PRCR-5)  2010 

Sequential and Simultaneous Biaxial Stretching of Polypropylene Films Containing -form crystalline Structure

Polymer Processing Society 26th Annual Meeting  2010 

Crystallization of Polyester Elastomer under Tensile Stress

International Symposium on Polymer Crystallization  2007 

Preparation of bicomponent fibers using recycled PET modified with a chain extender

Polymer Processing Society Asia/Australia regional meeting  2004 

On-line measurement of birefringence development during stretching of cyclo olefin copolymer films

Polymer Processing Society 26th Annual Meeting  2010 

Fundamental Study on Fabrication of Graded Index Optical Fiber Utilizing Diffusion of Low Molar Mass Additive in Bicomponent Spinning Procfess

36th Textile Research Symposium at Mt. Fuji  2007 

On-line measurement study in high speed in-line drawing process of poly(ethylene terephthalate) filament

2004 

Utilization of High-Speed Melt Spun Bicomponent Fibers for the Preparation of Reflective Polarizing Film

Polymer Processing Society 26th Annual Meeting  2010 

Fiber Structure Development in Melt Spinning of Thermoplastic Poly(vinyl alcohol)

Polymer Processing Society Asia/Australia Meeting,  2007 

Analysis on structure development of cycloolefin copolymers in elongational flow via on-line birefringence measurement

2004 

Structure Development in Polymer Processing

Polymer Processing Society 26th Annual Meeting  2010 

ポリエステル繊維の破断挙動におほぼす引張速度の影響

平成１９年度 繊維学会年次大会  2007 

Development of Stereocomplex Crystal of Polylactides in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes

M.Takasaki, H.Ito, T.Kikutani

International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan  2002 

Fiber Structure Development in High-speed Melt Spinning of Poly(trimethylene terephthalate)

K.H.Kim, F.Shibuya, H.Ito, H.H.Cho, T.Kikutani

Conference Proceedings of Polymer Processing Society 18th Annual Meeting, June 16-20, Guimaraes, Portugal  2002 

Drawing Behaviors and Its On-line Measurements for Polyester Films

H.Ito K.Suzuki, T.Kikutani, K.Nakayama

Conference Proceedings of Polymer Processing Society 18th Annual Meeting, June 16-20, Guimaraes, Portugal  2002 

Fiber Structure Development in High-Speed Melt Spinning of Polylactides

M.Takasaki, H.Ito, T.Kikutani

Polymer Fibres 2002, July 10-12, manchester, UK  2002 

Fiber Structure Formation in High-speed Melt Spinning of PP/PE Sheath-core Type Bicomponent Fibers

H.Ito Y.Shimomura, T.Kikutani

International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan  2002 

High-speed Melt Spinning of Poly(ethlene 2, 6-naphthalene dicarboxylate)/Amorphous Polymer Sheath-core fibers and Analysis of Physical Network Structure

T.Kikutani, K.Fukutome H.Ito

Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan  2002 

Fiber structure development in high-speed melt pinning of s-PS/a-PS bicomponent fibers

Y.Hada, H.Ito, T.Kikutani

Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan  2002 

Hot Drawing of PET Fiber Utilizing Multiple Reflection of CO_2 Laser Beam

H.Ito, O.H.Cho, T.Kikutani

Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan  2002 

Drawing Behaviors and Its On-line Birefringence Measurements for Polyester Films

H.Ito T.Kikutani

22nd Sino-Japanese Modern Engineering and Technology Symposium, 2002  2002 

Development and Plan of Nano Technology of National Project in Japan

TAKESHI KIKUTANI

Textile International Forum and Exhibition 2002  2002 

Online Analysis on Structure Formation in Film Blowing Process of Polypropylene

H.Ito K.Suzuki, T.Kikutani, H.J.Kang

, Abstracts of International Conference on Materials for Advanced Technologies ICMAT 2003, Singapore, December 7-12  2003 

High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity

Proceedings of Polymer Processing Society 17th annualmeeting  2001 

極微小エアギャップ水冷紡糸により作製したＰＥＴ繊維の構造と物性

プラスチック成形加工学会秋季大会  2006 

High Speed Melt Spinning with Periodic Oscillation of Take-up Velocity

CAE in Polymer Processing, Gordon Conference, Ventula, USA  2001 

Fiber Structure Development in Bicomponent Fibers of Recycled PET Modified with a Chain Extender

The 2006 Sino- Japanese Fiber Symposium  2006 

High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity

Proceedings of Polymer Processing Society 17th annualmeeting  2001 

Structure Development of Polylactides with Various D-lactide Content in the High-speed Melt Spinning

M.Takasaki, H.Ito, T.Kikutani

Proceedings of Polymer Processing Society 17th annualmeeting  2001 

On-line Measurement of Birefringence Development in Uniaxial and Biaxial Elongation of PEN

H.Ito K.Suzuki, T.Kikutani, K.Nakayama

Proceedings of Polymer Processing Society 17th annual meeting  2001 

Influence of the Presence of Neighboring Fibers on the Stress Distribution in the Vicinity of Embedded Fibers in Single-fiber Pull-out Test

Y.Hada, H.Ito, T.Kikutani

Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa  2001 

Fiber Structure Development in Melt Spinning of Poly(butylene succinate) Fibers

X.Shi M.Takasaki, H.Ito T.Kikutani

Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa  2001 

Fiber Structure Development in Melt Spinning Process with Periodic Modulation of Take-up Velocity

K.Kazama, H.Ito, T.Kikutani

Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa  2001 

Flow Drawing Behaviors and Its On-line Birefringence Measurement for Polyester Films

H.Ito K.Suzuki, T.Kikutani, K.Nakayama

Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa  2001 

Fiber Structure Development in High-speed Spinning of PP/PE Sheath-core Type Bicomponent Fibers

Y.Shimomura, H.Ito T.Kikutani

Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa  2001 

Fiber Structure Development of Polylactides in the High-speed Melt Spinning Process

T.Kikutani, M.Takasaki H.Ito

Melt spinning of Polymers and Glass in Polymer Research, May 13-14, Dresden Germany  2002 

Fundamental Study on the Preparation of Graded-index Plastic Optical Fibers utilizing Melt Spinning Process of Bicomponent Fibers

PPS2005 - America's Regional Meeting  2005 

Structure Development and Characteristics of Fibers Prepared in High Speed Melt Spinning and Drawing Processes of Polypropylenes with Controlled Stereo-regularity Distribution

Polymer Processing Society 21st Annual Meeting  2005 

High-Speed Melt Spinning of Non-Circular Cross-Section Fibers - Spinline Dynamics and Fiber Structure Formation -(共著）

Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia  1997 

Structural and Mechanical Behaviors of Poly(ethylene terephthalate) Fibers Modified by Blending Nucleating Agent

PPS2005 - America's Regional Meeting  2005 

High-Speed Melt Spinning of Non-Circular Cross-Section Fibers - Spinline Dynamics and Fiber Structure Formation -(共著）

Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia  1997 

Effect of the Positions and Temperatures of Multiple Liquid Isothermal Baths Installed in the Melt Spinning Line on the Properties of As-spun and Drawn Poly(ethylene terephthalate) Fibers

Polymer Processing Society 21st Annual Meeting  2005 

On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate)

Proceedings of the 15th Polymer Processing Society Annual Meeting  1999 

Fiber Structure Development in High-Speed Melt Spinning of Poly(L-lactide) with Various D-Lactide Contents and Racemate Polyractide

2005 International Conference on Advanced Fibers and Polymer Materials  2005 

On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate)

Proceedings of the 15th Polymer Processing Society Annual Meeting  1999 

Structure Development and Properties of High-Speed Melt Spun Poly(butylene terephthalate)/Poly(butylene adipate/terephthalate) Bicomponent Fibers

Polymer Processing Society 21st Annual Meeting  2005 

On-line measurement of orientation development in high-speed melt spinning of polypropylene

Polymer Fibres 2000, Manchester, UK  2000 

Poly(ethylene terephthalate) Fibers Prepared in Melt Spinning Process with CO_2_ Laser-Irradiation Heating

Proceedings of International Conference on Emerging Trends in Polymer & Textiles  2005 

On-line measurement of orientation development in high-speed melt spinning of polypropylene

Polymer Fibres 2000, Manchester, UK  2000 

Fundamental study on Structure Development of Thin-Wall Injection Molded Parts

2005 

On-line measurement of orientation development in the high-speed melt spinning process

T.Kikutani

Polymer Processing Society 16th Annual Meeting, Shanghai, China  2000 

On-line Measurement Study for Orientation Development of Poly(ethylene terephthalate) Filament in High Speed In-line Drawing Process Polymer

54th Symposium on Macromolecules  2005 

Fiber structure development in high-speed melt spinning of cation dyeable copolyester

C.Xu H.Ito, T.Kikutani, N.Okui K.Srikulkit

Polymer Processing Society 16th Annual Meeting, Shanghai, China  2000 

Mechanism of Structure Development in Poly(ethylene terephthalate) Filaments via High Speed In-line Drawing Process

繊維学会年次大会  2005 

High Speed Melt Spinning with Periodic Oscillation of Take-up Velocity

CAE in Polymer Processing, Gordon Conference, Ventula, USA  2001 

Characterization on Mixed-crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers

2005 

組成分布制御PPを用いた高速溶融紡糸および延伸における繊維の構造形成と物性

繊維学会年次大会  2005 

環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化の延伸履歴依存性

第１６回プラスチック成型加工学会秋季大会 成形加工シンポジア’０８  2008 

高強度炭酸ガスレーザー照射高速溶融紡糸における紡糸線の不安定性

繊維学会年次大会  2005 

Effect of Laser-Irradiation Heating in Melt Spinning Process of Polyoxymethylene on Structure and Properties of Resultant Fibers

Polymer Processing Society American Regional Meeting  2008 

マイクロポリマープロセスの成形性と構造物性に関する基礎研究

プラスチック成形加工学会年次大会  2005 

Effect of the Blending of Low Stereoregularity Component on Spinnability and Fiber Property Development in High-speed Melt Spinning of Polypropylene

Polymer Processing Society American Regional Meeting  2008 

マイクロスケール構造体を有する薄肉成形品の成形性と高次構造

プラスチック成形加工学会年次大会  2005 

ラセミ体ポリ乳酸繊維の昇温・冷却過程における結晶構造変化の分子配向依存性

プラスチック成形加工学会年次大会  2005 

シンジオタクチックポリスチレンの複合溶融紡糸における可紡性向上

プラスチック成形加工学会年次大会  2005 

Characterization on Mixed-crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers

2005 

マイクロ薄肉成形品の高次構造発現に関する実験的研究

第54回高分子学会年次大会  2005 

薄肉射出成形品の構造形成に関する基礎的検討

第54回理論応用力学講演会  2005 

Structural Development and Properties of High-speed Melt Spun Poly(butylene terephthalate)/Poly(butylene terephthalate/adipate) Bicomponent Fibers

Asian Workshop on Polymer Processing 2005  2005 

Characterization on Mixed Crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers

2005 International Conference on Advanced Fibers and Polymer Materials  2005 

Development of Fiber Structure with Highly Oriented Stereocomplex Crystals in High-speed Melt Spinning and Subsequent Annealing of Racemate Polylactides

Takeshi Kikutani, Midori Takasaki Motohiko Kuroda, Hiroshi Ito

Advanced Polymeric Materials Technology, Gyeongju  2003 

Inter-disciplinary Research Activities at Tokyo Tech on Development of New-Type Fibers via Melt spinning Process

2010 International Forum for Advanced Textiles  2010 

Preparation of Various Types of Polypropylene Fibers via Control of Stereo Regularity Distribution

2009 Forum on Advanced Textile Materials and Processing  2009 

Structure Development and Properties of High-speedMelt Spun Poly(butylene terephthalate) / Poly(butylene terephthalate/adipate) bicomponent Fibers

成形加工シンポジア’04  2004 

Simultaneous measurements of stress and birefringence development during extensional deformation of cyclic olefin copolymer

IUPAC International Symposium on Advanced Polymer for Emerging Technologies  2006 

Fiber formatioin, structure and properties of a new type of polyether-ester elastomeric fibers

2009 International Conference on Advanced Fibers and Polymer Materials  2009 

超薄肉射出成形品の構造形成に関する基礎的検討

成形加工シンポジア'04  2004 

Fiber structure development in single- and bi-component spinning of biodegradable aliphatic-aromatic copolyesters

International Fiber Conference 2006  2006 

On-line Measurement of Birefringence Development during Sequential Biaxial Stretching of cyclo Olefin Copolymer Films

Polymer Processing Society Europe / Africa Regional Meeting  2009 

インテリジェントマイクロポリマー成形システムによる材料特性および成形性の評価

成形加工シンポジア'04  2004 

Development of High-strength Poly(ethylene terephthalate) Fibers via Control of Melt Structure

Polymer Processing Society 22nd Annual Meeting  2006 

Measurement of Birefringence Variation during Sequential Biaxial Stretching of PET Film

The 10th Asian Textile Conference  2009 

複合繊維の高速溶融紡糸における繊維構造形成の断面形態依存性

第16回日本レオロジー学会高分子加工技術討論会  2004 

Development of high-strength PET fibres using liquid isothermal bath

Polymer Fibres 2006  2006 

Fiber Structure Development in Melt Spinning and Subsequent Drawing Process of Poly(vinilidene fluoride)/Polypropylene Bicomponent Fibers

Japanese-Sino Fiber Symposium 2009  2009 

ポリエチレンテレフタレートの高速紡糸過程における繊維構造形成の広角X線オンライン解析手法の確立

繊維学会秋季大会発表会  2004 

ポリエチレンテレフタレート未延伸繊維の物性と延伸性の経時変化

第１５回 プラスチック成形加工学会秋季大会  2007 

Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair

The 10th Asian Textile Conference  2009 

高速紡糸ポリエチレンテレフタレート繊維のシンクロトロンX線散乱法による精密構造解析

繊維学会秋季大会発表会  2004 

高立体規則性PPの高速溶融紡糸における分子量の異なる低立体規則性PPの添加効果

第１５回 プラスチック成形加工学会秋季大会  2007 

分子量の異なるPET樹脂を用いた海島型複合繊維

繊維学会秋季大会発表会  2004 

Achievement of Project on the Development of High-Strength Poly(ethylene terephthalare) Fibers

The 10th Asian Textile Conference  2009 

マイクロ射出成形におけるマイクロ成形体の転写性と構造形成

第１５回 プラスチック成形加工学会秋季大会  2007 

Fracture Toughness and Structure Changes During Tensile Deformation of PET Fibers

Proceedings of The 10th Asian Textile Conference  2009 

ラセミ体ポリ乳酸繊維の昇温過程における結晶構造変化の分子配向依存性

繊維学会秋季大会発表会  2004 

ガス含浸光学ポリマーの熱処理による転写性と構造発現への影響

第１５回 プラスチック成形加工学会秋季大会  2007 

Stability of the melt spinning process of poly(ethylene terephthalate) with CO2 laser irradiation: Experiment and simulation

Fiber Preprints, Japan  2009 

Development of high-strength PET fibres using liquid isothermal bath

Polymer Fibres 2006  2006 

Fracture Toughness and Structure Changes During Tensile Deformation of PET Fibers

Proceedings of The 10th Asian Textile Conference  2009 

On-line Measurement of Structure Development in Fiber Spinning and Film Blowing of Polypropylene

TAKESHI KIKUTANI

Polymer Crystallization and Structure Formation in Processing, Linz  2003 

Fiber Structure Development in Bicomponent Fibers of Recycled PET Modified with a Chain Extender

The 2006 Sino- Japanese Fiber Symposium  2006 

Stability of the melt spinning process of poly(ethylene terephthalate) with CO2 laser irradiation: Experiment and simulation

Fiber Preprints, Japan  2009 

On-line Measurement on Structure Formation in Film Blowing Process

Hiroshi Ito Ken-ichi Suzuki Takeshi Kikutani Ho-Jong, Kang, Toshitaka Kanai

Advanced Polymeric Materials Technology, Gyeongju  2003 

Structural Modification of Polyester Fiber in Supercritical Carbon Dioxide Fluid

Polymer Processing Society 22nd Annual Meeting  2006 

極微小エアーギャップ溶融紡糸における繊維構造形成機構に及ぼす分子鎖剛直性の影響

平成２１年度 繊維学会年次大会  2009 

Influence of Branching on the Structure and Properties of Poly(ethylene terephthalate) Fibers obtained by High-speed Melt Spinning

Chen Xu Hiroshi Ito, Takeshi Kikutani

Polymer Processing Society 19th Annual Meeting, Melbourne  2003 

Mechanical Properties of Conjugated-Spun and Laser-Drawn Poly(ethylene terephthalate) Fiber

Polymer Processing Society 22nd Annual Meeting  2006 

複合繊維の高速溶融紡糸における複屈折制御性を利用した光学機能繊維の開発

平成２１年度 繊維学会年次大会  2009 

Formation of Stereocomplex Crystals in Fiber Processing of Racemate Polylactide

Takeshi Kikutani, Midori Takasaki Motohiko Kuroda, Hiroshi Ito

Polymer Processing Society 19th Annual Meeting, Melbourne  2003 

Short-period fluctuation of the characteristics of poly(ethylene terephthalate) fibers revealed through the on-line measurement of the in-line drawing process and the mechanical testing of fibers

Polymer Fibres 2006  2006 

溶融紡糸により作製したポリエーテルエステル系熱可塑性エラストマー繊維の低温特性

平成２１年度 繊維学会年次大会  2009 

Experimental Analysis on Structure Formation in Tubular Film Blowing Process

Hiroshi Ito Ken-ichi Suzuki Takeshi Kikutani, Ho-Jong Kang

Polymer Processing Society 19th Annual Meeting, Melbourne  2003 

Computer Simulation of Phase-inversed Morphology Formed in Polyaniline/Polyacrylonitrile Blend Films

Polymer Processing Society 22nd Annual Meeting  2006 

組成分布制御ポリプロピレンを用いた弾性糸の開発

プラスチック成形加工学会 第２０回年次大会  2009 

High-speed Melt Spinning of Bicomponent Fibers

TAKESHI KIKUTANI

Textile International Forum and Exhibition 2003  2003