Organization
School of Engineering Associate Professor
Title
Associate Professor
External link
TANAKA TOMOHISA
Research Interests
-
Additive Manufacturing
-
レーザ援用加工
-
高周波振動援用加工
Research Areas
-
Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering / レーザ加工, 振動援用加工
-
Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Machine elements and tribology / 機能表面 傾斜機能材料
-
Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Design engineering / 機能表面 傾斜機能材料
Research History
-
Tokyo Institute of Technology School of Engineering Associate Professor
2017.4
-
Nagoya University Graduate School of Engineering Associate Professor
2014.4 - 2017.3
-
Tokyo Institute of Technology Graduate School of Science and Engineering Associate Professor
2007.4 - 2014.3
-
Tokyo Institute of Technology Graduate School of Science and Engineering Associate Professor
2007.1 - 2007.3
-
Tokyo Institute of Technology Assistant Professor
2001.4 - 2006.12
Professional Memberships
-
THE JAPAN SOCIETY FOR PRECISION ENGINEERING
-
THE JAPAN SOCIETY OF MECHANICAL ENGINEERS
-
THE JAPAN SOCIETY FOR ABRASIVE TECHNOLOGY
-
JAPANESE SOCIETY OF TRIBOLOGISTS
Committee Memberships
-
日本機械学会 生産システム部門運営委員
2025.4
-
日本機械学会 生産システム部門運営委員
2018.4 - 2024.3
Committee type：Academic society
-
日本機械学会 生産加工・工作機械部門運営委員
2012.4 - 2014.3
Committee type：Academic society
-
日本機械学会 生産システム部門運営委員
2010.4 - 2013.3
Committee type：Academic society
-
日本トライボロジー学会 会誌編集委員
2009.4 - 2012.3
Committee type：Academic society
-
日本トライボロジー学会 出版委員会委員
2009.4 - 2011.3
Committee type：Academic society
-
精密工学会 会誌編集委員
2008.4 - 2011.3
Committee type：Academic society
-
日本トライボロジー学会 大会実行委員
2007.7 - 2009.6
Committee type：Academic society
-
日本トライボロジー学会 広報情報化委員
2004.4 - 2007.3
Committee type：Academic society
-
日本トライボロジー学会 研究委員会委員
2004.1 - 2008.3
Committee type：Academic society
Papers
-
Burnishing processing of curved thin plates using a newly developed burnishing system Reviewed
Ryoukou Kamiya, JIANG ZHU, TOMOHISA TANAKA
Proceeding of the 27th International Conference on Mechatronics Technology 2024.11
-
Development of a ball burnjishing processing system cpplicable to curved thin plates
Ryoukou Kamiya, JIANG ZHU, TOMOHISA TANAKA
Proceedings of the IMEC2024 2024.11
-
Novel non-traditional mechanical drilling process with squeeze motion
Yasunori Sakai, Ryo Kinouchi, Yuta Toki, Tomohisa Tanaka
MATERIALS LETTERS 289 2021.4
-
Novel non-traditional mechanical drilling process with squeeze motion
Yasunori Sakai, Ryo Kinouchi, Yuta Toki, Tomohisa Tanaka
Materials Letters 289 2021.4
-
Recognition of Multi-Intersecting Features of Boundary Representation CAD Model
Jiang Zhu, Da Xie, Tomohisa Tanaka
Journal of Physics: Conference Series 1827 ( 1 ) 2021.3
-
Micro ultrasonic knurling technology creating high precision texture on sliding surface in mechanical system (fundamental experiment)
Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 5 2021
-
Novel Laser Melting Stir Process for Microwelding Reviewed
Yasunori Sakai, Wataru Ichikawa, Tomohisa Tanaka
Manufacturing Letters 2020.5
-
Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect) Reviewed
Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
INFORMATION 23 ( 1 ) 25 - 32 2020.3
-
Structural damper for auto-damping mechanical components Reviewed
Yasunori Sakai, Tomohisa Tanaka
Structures 24 864 - 868 2020.2
-
Graph-based feature recognition and combination method for automatic process planning system
Da Xie, Jiang Zhu, Tomohisa Tanaka
JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020 2020
-
Investigation of corrosion resistance enhancement for biodegradable magnesium alloy by ball burnishing process
Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Dinh Ngoc Pham
International Journal of Automation Technology 14 ( 2 ) 175 - 183 2020
-
Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31
Chenyao Cao, Jiang Zhu, Tomohisa Tanaka
Lecture Notes in Mechanical Engineering 97 - 107 2020
-
Influence of lubricant on nonlinear vibration characteristics of linear rolling guideway Reviewed
Yasunori Sakai, Tomohisa Tanaka
Tribology International In Press 2019.12
-
機械加工における超音波振動の応用例と今後の展望 Invited
Yasunori SAKAI, Shigeru AOKI, Tomohisa TANAKA
Ultrasonic Techno 31 ( 12 ) 1 - 5 2019.12
-
Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control Reviewed
Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Fang-Jung Shiou, Shunichi Sawada, Hayato Yoshioka
International Journal of Automation Technology Vol. 13 ( No. 5 ) pp. 619 - 630 2019.9
-
Application of Ultrasonic Vibration to Manufacturing and Aspect of Application to Plastic Work
AOKI Shigeru, SAKAI Yasunori, TANAKA Tomohisa
The Proceedings of Conference of Hokuriku-Shinetsu Branch 2019 G035 2019
-
Vibration characteristics of structure parts integrating passive damper P-DACS
sakai Yasunori, Tanaka Tomohisa, Kobayashi Syunya, Jiang Zhu, Katou Souichirou, Ohkubo Tsutomu, Midorikawa Tetsushi
The Proceedings of Manufacturing Systems Division Conference 2019 504 - 504 2019
-
Development of Micro Ultrasonic Knurling Technology Creating High Precision Texture:(Basic Experiment)
AOKI Shigeru, SAKAI Yasunori, TANAKA Tomohisa, Liu Shihao
The Proceedings of the Dynamics & Design Conference 2019 134 - 134 2019
-
ボールバニシング加工の加工条件がマグネシウム合金の表面改質効果に及ぼす影響
Cao Chenyao, 朱 疆, 田中 智久, 酒井 康徳
精密工学会学術講演会講演論文集 2019 147 - 148 2019
-
Study on the accuracy improvement for laser forming processing of micro-wire
Jiang Zhu, Akira Tajima, Tomohisa Tanaka, Hayato Yoshioka
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 2017.11
-
Evaluation Method for Vibration Characteristics of Rolling Guideway Influencing on Dynamic Stiffness of Machine Tool Invited Reviewed
Yasunori SAKAI, Tomohisa TANAKA
Journal of Japanese Society of Tribologists 62 ( 9 ) 566 - 574 2017.9
-
The Influence of Laser Irradiation Parameters to the Surface Condition and the Color of Titanium
Hotta Shunsuke, Yoshioka Hayato, Zhu Jiang, Tanaka Tomohisa
Proceedings of JSPE Semestrial Meeting 2017 787 - 788 2017
-
金属極細線のレーザフォーミングにおける加工精度向上手法の研究
田島 彬, 吉岡 勇人, 朱 疆, 田中 智久
精密工学会学術講演会講演論文集 2016 817 - 818 2016
-
AUTOMATIC SEGMENTATION AND FEATURE IDENTIFICATION OF LASER SCANNING POINT CLOUD DATA FOR REVERSE ENGINEERING Reviewed
Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka
2016 INTERNATIONAL SYMPOSIUM ON FLEXIBLE AUTOMATION (ISFA) 278 - 285 2016
-
Efficiency of the free-form surface machining with optimum tool-path for each segment
Nagase Shigenobu, Zhu Jiang, Yoshioka Hayato, Saito Yoshio, Tanaka Tomohisa
Proceedings of JSPE Semestrial Meeting 2015 771 - 772 2015
-
切削条件がPTFEの加工面精度に与える影響に関する研究
原 幹也, 朱 疆, 田中 智久, 吉岡 勇人, 齋藤 義夫
精密工学会学術講演会講演論文集 2015 1039 - 1040 2015
-
自律分散システムを用いた柔軟な生産スケジューリングシステムの構築
高 きい, 田中 智久, 朱 疆, 吉岡 勇人, 齋藤 義夫
精密工学会学術講演会講演論文集 2015 267 - 268 2015
-
グラフを用いた複合加工機のための自動加工工程設計システム
加藤 雅人, 朱 疆, 吉岡 勇人, 齋藤 義夫, 田中 智久
精密工学会学術講演会講演論文集 2015 773 - 774 2015
-
Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data
Bhide Saurabh, Zhu Jiang, Yoshioka Hayato, Tanaka Tomohisa, Saito Yoshio
Proceedings of JSPE Semestrial Meeting 2015 1099 - 1100 2015
-
A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part
Muslimin Muslimin, Zhu Jiang, Yoshioka Hayato, Saito Yoshio, Tanaka Tomohisa
Proceedings of JSPE Semestrial Meeting 2015 1101 - 1102 2015
-
Positioning calibration of a parallel mechanism worktable with 6-DOF Reviewed
Yuanrui Zhang, Shigenobu Nagase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Key Engineering Materials 625 392 - 397 2015
-
Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway Reviewed
Yasunori Sakai, Tomohisa Tanaka, Hayato Yoshioka, Jiang Zhu, Masaomi Tsutsumi, Yoshio Saito
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 9 ( 1 ) 2015
-
High efficiency tool path generation for freeform surface machining based on NURBS subdivision Reviewed
Zhu Jiang, Hozumi Akimitsu, Tanaka Tomohisa, Saito Yoshio
Key Engineering Materials 625 372 - 377 2015
-
Graph based automatic process planning system for multi-tasking machine Reviewed
Jiang Zhu, Masato Kato, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 9 ( 3 ) 2015
-
Study on plane feature extraction in registration of laser scanning data sets for reverse engineering Reviewed
Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 9 ( 5 ) 1 - 14 2015
-
Feature extraction based 3D model registration for surface finish quality evaluation Reviewed
Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Advanced Materials Research 1017 141 - 146 2014
-
Study on the mechanism of laser forming to the thin stainless-steel wire Reviewed
Tomohisa TANAKA, Shinya OISHI, Jiang ZHU, Yoshio Saito
International Journal of Nanomanufacturing 11 ( 3月4日 ) 219 - 236 2014
-
直動転がり案内の振動特性に生じる加振力依存性 Reviewed
Yasunori SAKAI, Tomohisa TANAKA, Masaomi TSUTSUMI
Journal of the Japan Society for Precision Engineering 80 ( 8 ) 783 - 791 2014
-
Research on 3D model processing technologies in the application of freeform surface machining Reviewed
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Advanced Materials Research 1017 281 - 286 2014
-
Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system Reviewed
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito
International Journal of Advanced Manufacturing Technology 65 ( 9-12 ) 1493 - 1500 2013
-
A stochastic analysis of plastic area on rough surface contact in relation with transition from mild to severe wear Reviewed
Tsunamitsu Nakahara, Tomohisa Tanaka
Tribology Online 8 ( 1 ) 128 - 134 2013
-
Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA Reviewed
Kohei Ogura, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011) 516 192 - + 2012
-
Robust Production Scheduling using Autonomous Distributed Systems Reviewed
Shunsuke Oike, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011) 516 166 - + 2012
-
Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm Reviewed
Xiaoyi Wang, Jing Chen, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4 472-475 317 - + 2012
-
Measurement of movement error and its compensation for 6-DOF parallel mechanism worktable Reviewed
Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV 523-524 463 - 468 2012
-
Surface quality improvement in CNC end milling machined aerospace AL-2017-T4 alloy using carbon onion nanolubrication with dlc cutting tool
M. Sayuti, Tomohisa Tanaka, Ahmed A. D. Sarhan, Yoshio Saito, M. Hamdi
Lecture Notes in Engineering and Computer Science 3 1487 - 1491 2012
-
3D Model Registration Based on Feature Extraction Reviewed
Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka, Yoshio Saito
MATERIALS AND MANUFACTURING, PTS 1 AND 2 299-300 1091 - 1094 2011
-
On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool Reviewed
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Ryuta Tanabe, Masaaki Takenaka, Toru Fukami
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 5 ( 4 ) 240 - 251 2011
-
Optimization of Multipass Turning Parameters by Genetic Algorithm Reviewed
Nafis Ahmad, Tomohisa Tanaka, Yoshio Saito
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2 264-265 1545 - + 2011
-
Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation Reviewed
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Lining Sun
International Journal of Design Engineering 3 ( 3 ) 218 - 231 2011
-
Generating the measurement points based on finishing NC data Reviewed
Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu
2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings 34 - 38 2011
-
Excimer Laser 3D Machining Based on Irradiation Pulse Number Control Reviewed
Tomohisa Tanaka, Ryo Suzuki, Jiang Zhu, Yoshio Saito
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 4 ( 5 ) 1033 - 1043 2010
-
Automatic Manufacturing Feature Extraction of CAD models for Machining Reviewed
Yusuke Narabu, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
ADVANCED PRECISION ENGINEERING 447-448 287 - 291 2010
-
Development of Flexible Worktable for Endmilling Based on Parallel Mechanism Reviewed
Tomohisa Tanaka, Masahiro Komori, Jiang Zhu, Yoshio Saito
ADVANCED PRECISION ENGINEERING 447-448 826 - + 2010
-
Tool Path Planning Assist System for Freeform Surface Machining Reviewed
Jiang Zhu, Keisuke Nomura, Tomohisa Tanaka, Yoshio Saito
ADVANCED PRECISION ENGINEERING 447-448 321 - + 2010
-
Kashiwazaki Kariwa Nuclear Power Station, Tokyo Electric Power Company(Gravure & Interview)
KATAOKA Hiroto, TOBA Akio, TANAKA Tomohisa
Journal of the Japan Society of Precision Engineering 75 ( 3 ) 329 - 332 2009.3
-
S1301-2-1 Compact Machine Tool with Working Space in Shell
SUZUKI Jun, Zhu Jiang, Tanaka Tomohisa, SAITO Yoshio
The proceedings of the JSME annual meeting 2009 233 - 234 2009
-
S1303-2-2 Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface
NARABU Yusuke, HARANUD Zuanshi, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
The proceedings of the JSME annual meeting 2009 281 - 282 2009
-
3502 Flexible Manufacturing Schedugling
Oike Shunsuke, Tanaka Tomohisa, Saito Yoshio
The proceedings of the JSME annual meeting 2008 295 - 296 2008
-
3406 Research of improvement of 8-axis processing system
Nomura Keisuke, Zhu jiang, Tanaka Tomohisa, Saito Yosio
The proceedings of the JSME annual meeting 2008 255 - 256 2008
-
Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System Reviewed
Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING 2 ( 4 ) 812 - 823 2008
-
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Journal of Advanced Mechanical Design, Systems, and Manufacturing 1 ( 5 ) 628 - 639 2007
-
An 8-axis robot based rough cutting system for surface sculpturing Reviewed
Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito
TOWARDS SYNTHESIS OF MICRO - /NANO - SYSTEMS ( 5 ) 139 - + 2007
-
Multi-resolution mesh for sculptured surface machining Reviewed
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Journal of Solid Mechanics and Materials Engineering 1 ( 1 ) 69 - 80 2007
-
Cutting parameters optimization and constraints investigation for turning process by GA with self-organizing adaptive penalty strategy Reviewed
Nafis Ahmad, Tomohisa Tanaka, Yoshio Saito
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING 49 ( 2 ) 293 - 300 2006.6
-
Rough machining process and its simulation for robot integrated surface sculpturing system Reviewed
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
PROCEEDINGS OF THE FOURTH IASTED INTERNATIONAL CONFERENCE ON CIRCUITS, SIGNALS, AND SYSTEMS 368 - + 2006
-
環境対応型工作機械用MQLオイルミスト濃度計測システムの試作 Reviewed
Tomohisa Tanaka, Yoshihiro Iida, Yoshio Saito
Transactions of the Japan society of mechanical engineers. C 72 ( 715 ) 934 - 940 2006
-
発泡スチロールの熱線加工メカニズム(熱線停止時の加工特性) Reviewed
Tomohisa Tanaka, Yoshio Saito
Transactions of the Japan society of mechanical engineers. C 72 ( 722 ) 3383 - 3389 2006
-
The effect of interaction between neighboring asperity contacts on wear mode transition in sliding contact of rough surfaces
Tomohisa Tanaka, Chikara Yamanaka, Keiji Kyogoku, Tsunamitsu Nakahara
Proceedings of the World Tribology Congress III - 2005 109 - 110 2005
-
Using Ultrasound for Measuring Grasping Force of Robot Soft Finger
AKBARI Javad, IMAMURA Mitsuhiro, TANAKA Tomohisa, SAITO Yoshio
JSME International Journal Series B Fluids and Thermal Engineering 47 ( 1 ) 175 - 179 2004.3
-
The effect of slip on critical contact pressure causing wear mode transition based on burwell-strang's concept: Analysis by slip line field theory
Tomohisa Tanaka, Tsunamitsu Nakahara, Keiji Kyogoku
Japanese Journal of Tribology 46 ( 2 ) 122 - 124 2001
-
BURWELL-STRANGの概念による摩耗モード遷移臨界圧力に及ぼすすべりの影響 -二次元すべり線場理論による解析- Reviewed
Tomohisa Tanaka, Keiji Kyogoku, Tsunamitsu Nakahara
Journal of Japanese Society of Tribologists 46 ( 4 ) 339 - 345 2001
-
Stochastic analysis of critical pressure in the concept of mode transition from mild to severe by burwell-strang
Tomohisa Tanaka, Tsunamitsu Nakahara, Keiji Kyogoku
Japanese Journal of Tribology 45 ( 6 ) 490 - 491 2000
-
Burwell-Strangによる軽?重摩耗遷移の概念に基づく遷移臨界圧力の統計的解析 Reviewed
Tomohisa Tanaka, Keiji Kyogoku, Tsunamitsu Nakahara
Journal of Japanese Society of Tribologists 45 ( 11 ) 832 - 838 2000
-
Stochastic analysis on critical pressure in concept of mode transition from mild to severe wear by burwell-strang
Tomohisa Tanaka, Tsunamitsu Nakahara, Keiji Kyogoku
Toraibarojisuto/Journal of Japanese Society of Tribologists 45 ( 11 ) 832 - 838 2000
MISC
-
Development of Micro Ultrasonic Knurling Technology Creating High Precision Texture (Creating Latticed Plane Texture)
Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka, Shihao Liu
Proceeeding of JSME Conference 2019 2019 1 - 2 2020.3
-
Creating Latticed Plane Texture Using Micro Ultrasonic Knurling Technology
青木繁, 酒井康徳, 田中智久
電子情報通信学会技術研究報告(Web) 120 ( 295(US2020 50-56) ) 2020
-
Development of Miro Ultrasonic Knurling Technology Creating High Precision Texture(Reduction of Pressing Force and Friction Force)
青木繁, 酒井康徳, 田中智久
日本機械学会関東支部・精密工学会山梨講演会講演論文集(CD-ROM) 2020 2020
-
Fundamental Experiment for Knurling Technology Using Ultrasonic Vibration
119 ( 332 ) 25 - 28 2019.12
-
Development of micro drilling process without rotary motor by vibration mode control
Toshiya Chiga, Yasunori Sakai, Tomohisa Tanaka
Proceeding of International Conference of Asian Society for Precision Engineering and Nanotechnology 2019 1 - 4 2019.11
-
Development of new micro laser stir welding process with liquid-solid phase shift
Wataru Ichikawa, Yasunori Sakai, Tomohisa Tanaka
Proceeding of International Conference of Asian Society for Precision Engineering and Nanotechnology 2019 1 - 4 2019.11
-
Development of Micro Ultrasonic Knurling (MUK) to Manufacture Micro Surface Texture
Shihao Liu, Yasunori Sakai, Tomohisa Tanaka, Shigeru Aoki
Proceeding of International Conference of Asian Society for Precision Engineering and Nanotechnology 2019 1 - 4 2019.11
-
Basic experiment for knurling processing technology using ultrasonic vibration Reviewed
Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
2019 1 - 4 2019.11
-
Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway
Yasunori Sakai, Tomohisa Tanaka
Proceeding of Abrasive Technology Conference 2019 2019 1 - 2 2019.8
-
Influence of Ultrasonic Vibration on Working Force and Friction in Knurling Process
Shihao Liu, Yasunori Sakai, Tomohisa Tanaka, Shigeru Aoki
Proceeding of Abrasive Technology Conference 2019 2019 1 - 2 2019.8
-
On Application of Ultrasonic Vibration to Manufacturing and Future Aspects
Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
IEICE Technical Report 2018 ( 353(US2018 70-77) ) 1 - 4 2018.12
-
Development of Structure Integrated Passive damper (P-DACS)
Syunya KOBAYASHI, Yasunori SAKAI, Tomohisa TANAKA, Jiang ZHU
The Proceeding of the 18th International Machine Tool Engineers` Conference 2019 1 - 1 2018.11
-
Modification of Metal Structure Based on Burnishing Processing
Cao CHENYAO, Jiang ZHU, Tomohisa TANAKA, Yasunori SAKAI
The Proceeding of the 18th International Machine Tool Engineers` Conference 2019 1 - 1 2018.11
-
Evaluation of vibration characteristics of passive structure damper P?DACS manufactured by metal additive manufacturing
Yasunori SAKAI, Tomohisa TANAKA
Proceedings of JSME 2018Manufacturing Systems Division Conference 2018 1 - 2 2018.3
-
Laser coloring on titanium by controlling oxide film formation mode
JINGYING WU, Tomohisa TANAKA, Jiang ZHU, Yasunori SAKAI
Proceedings of JSPE 2018 Spring Meeting 2018 37 - 38 2018.3
-
Influence of geometrical parameters of passive-damper with anisotropic composite structure(P-DACS) on its dynamic characteristics
Syunya KOBAYASHI, Yasunori SAKAI, Tomohisa TANAKA, Jiang ZHU
Proceedings of JSPE 2018 Spring Meeting 2018 ( 0 ) 65 - 66 2018.3
-
Influence of geometric form and mechanical properties of polymer on damping performance of Passive-Damper with Anisotropic Composite Structure (P-DACS)
Yasunori SAKAI, Tomohisa TANAKA, Jiang ZHU
Proceedings of JSPE 2017 Spring Meeting 2017 ( 0 ) 933 - 934 2017.3
-
Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State
Satoshi INOUE, Yasunori SAKAI, Tomohisa TANAKA, Hayato YOSHIOKA, Jiang ZHU, Kaoru HOSHIDE, Ryuji FURUSAWA
Proceedings of JSPE 2017 Spring Meeting 2017 ( 0 ) 321 - 322 2017.3
-
Influence of Designing Parameters on Vibration Damping of Rolling Guideway
Yasunori Sakai, So Fukasawa, Zhu Jiang, Hayato Yoshioka, Tomohisa Tanaka, Kaoru Hoshide, Ryuji Furusawa
The Proceedings of the 16th International Conference on Precision Engineering (ICPE 2016) 2016 1 - 2 2016.11
-
Influence of filler condition on damping capacity of synthetic resin
Yasunori SAKAI, Tomohisa TANAKA, Jiang ZHU
The Proceedings of The JSME 2016 Manufacturing & Machine Tool Conference 2016 ( 0 ) 1 - 2 2016.10
-
Study on Contact Damping Characteristic of Linear Rolling Guideway using Developed Apparatus
Yasunori SAKAI, So FUKASAWA, Jiang ZHU, Hayato Yoshioka, Tomohisa TANAKA, Kaoru HOSHIDE, Ryuji FURUSAWA
The Proceedings of Tribology Conference 2016 Spring 2016 1 - 2 2016.5
-
Development of Measuring Apparatus for Contact Damping of Rolling Guideway
Yasunori SAKAI, So FUKASAWA, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA, Kaoru HOSHIDE, Ryuji FURUSAWA
The Proceedings of Conference of JSME 2016 Kanto Branch 2016 ( 0 ) 1 - 2 2016.3
-
Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway
So FUKASAWA, Yasunori SAKAI, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA, Kaoru HOSHIDE, Ryuji FURUSAWA
The Proceedings of Conference of JSME 2016 Kanto Branch 2016 ( 0 ) 1 - 2 2016.3
-
OS0612 Coloring of Titanium by using YVO_4 Laser : Relation between laser parameters and coloring
Hotta Shunsuke, Yoshioka Hayato, Zhu Jiang, Tanaka Tomohisa
2016 ( 22 ) "OS0612 - 1"-"OS0612-2" 2016.3
-
Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway
Yasunori SAKAI, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA
Proceedings of JSPE 2016 Spring Meeting 2016 ( 0 ) 739 - 740 2016.3
-
New identification method for dynamic characteristics of roller guideway based on finite element model
Yasunori SAKAI, Zhu JIANG, Hayato YOSHIOKA, Tomohisa TANAKA
ASPE 2015 annual meeting proceedings 30 357 - 362 2015.11
-
1907 The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part
Muslimin, ZHU Jiang, YOSHIOKA Hayato, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015 ( 8 ) "1907 - 1"-"1907-6" 2015.10
-
1208 Fundamental Study for Control of Hue and Brightness in the Laser Coloring
TANAKA Tomohisa, HARADA Syo, ZHU Jiang, YOSHIOKA Hayato, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015 ( 8 ) "1208 - 1"-"1208-5" 2015.10
-
Stiffness Identification of Roller Guideway Based on Finite Element Method
Yasunori SAKAI, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA
The Proceedings of JSME 2015 Annual Congress 2015 ( 0 ) 1 - 6 2015.9
-
120 Research on Titanium Coloring using Laser Irradiation : Improvement repeatability in color marking and realization of wide color space
Harada Sho, Zhu Jiang, Tanaka Tomohisa, Yoshioka Hayato, Saito Yoshio
Manufacturing Systems Division Conference 2015 109 - 110 2015.3
-
Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring
Yasunori SAKAI, Hayato YOSHIOKA, Jiang ZHU, Tomohisa TANAKA, Yoshio SAITO
Proceedings of JSPE 2015 Spring Meeting 2015 ( 0 ) 351 - 352 2015.3
-
Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway
Yasunori Sakai, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito
The Proceedings of MECHATRONICS 2014 1 - 5 2014.11
-
Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway
Yasunori SAKAI, Jiang ZHU, Tomohisa TANAKA, Hayato YOSHIOKA, Yoshio SAITO
The Proceedings of JSME 2014 Manufacturing & Machine Tool Conference 2014 ( 10 ) 97 - 98 2014.11
-
Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction
Yasunori Sakai, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito
Proceeding of the 16th International Machine Tool Engineers` Conference 1 - 1 2014.11
-
218 Fabrication of three-dimensional laminate of thin metal wire using a laser
Maeda Naoki, Tanaka Tomohisa, Zhu Jiang, Saito Yoshio
Manufacturing Systems Division Conference 2014 107 - 108 2014.3
-
217 Study on laser forming mechanism of stainless wire
Oishi Shinya, Tanaka Tomohisa, Zhu Jiang, Saito Yoshio
Manufacturing Systems Division Conference 2014 105 - 106 2014.3
-
Influence of the force amplitude on the dynamic characteristic of a roller based linear rolling bearing
Yasunori SAKAI, Toshiki HANAOKA, Jiang ZHU, Yoshio SAITO, Tomohisa TANAKA
Proceedings of JSPE 2014 Spring Meeting 2014 ( 0 ) 677 - 678 2014.3
-
A027 Development of Automatic Machining Process Deciding System Based on 3D-Model
ZHU Jiang, MUTO Saori, Tanaka Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2013 ( 7 ) 123 - 128 2013.11
-
408 Study on laser forming for stainless wire
Oishi Shinya, Tanaka Tomohisa, Zhu Jiang, Saito Yoshio
Manufacturing Systems Division Conference 2013 69 - 70 2013.3
-
411 Additive manufacturing of custom-made hip implants
Abdelaal Osama, Zhu Jiang, Tanaka Tomohisa, Darwish Saied, Saito Yoshio
Manufacturing Systems Division Conference 2013 91 - 92 2013.3
-
Study on Effect of Cutting Parameter on Surface Roughness in the Milling of Polytetrafluoroethylene
213 - 216 2013
-
E13 Study on Coloring Mechanism of Oxide Layers on Titanium by Laser Irradiating
Zhou Xu, Zhu Jiang, Tanaka Tomohisa, Saito Yoshio
The ... Manufacturing & Machine Tool Conference 2012 ( 9 ) 275 - 276 2012.10
-
B18 Tool Path Generation for Layered Manufacturing by Wire Electric Discharge Machining (WEDM)
Zhu Jiang, Goto Jumpei, Tanaka Tomohisa, Saito Yoshio
The ... Manufacturing & Machine Tool Conference 2012 ( 9 ) 103 - 104 2012.10
-
202 Validation of rough machining process for turning center by using multi-resolution mesh
Hasegawa Masaomi, Zhu Jiang, Tanaka Tomohisa, Saito Yoshio
Manufacturing Systems Division Conference 2012 29 - 30 2012.3
-
3263 Manufacturing Feature Extraction System of 3D-Model for Process Planning
ZHU Jiang, NARABU Yusuke, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2011 ( 6 ) "3263 - 1"-"3263-6" 2011.11
-
3266 True contact part measurement on rough surface by optical methodology in high load region
KUBO Takahiro, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2011 ( 6 ) "3266 - 1"-"3266-4" 2011.11
-
S131012 Fabrication and evaluation of 3D shape by rapid prototyping
MUTO Saori, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S131012 - 1"-"S131012-3" 2011.9
-
G140021 Robust Production Scheduling Using Autonomous Distributed Systems : About the Use of the JSME Specification Template File
OIKE Shunsuke, TANAKA Tomohisa, ZHU Jiang, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "G140021 - 1"-"G140021-5" 2011.9
-
S132012 Research on appearance of structural color by laser irradiation to titanium
KINOSHITA Shinya, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S132012 - 1"-"S132012-5" 2011.9
-
S131013 Development of the support-free RP device with 5-axis control
TSUKASAKI Haruka, ZHU Jiang, TANAKA Tomohisa s, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S131013 - 1"-"S131013-4" 2011.9
-
S132011 Fundamental research to construct the model made from heterogeneous materials by using laser
Nishio Taku, Zhu Jiang, Tanaka Tomohisa, Saito Yoshio
Mechanical Engineering Congress, Japan 2011 "S132011 - 1"-"S132011-4" 2011.9
-
S131021 Development of processing support system for 6-axis WEDM
HOZUMI Akimitsu, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S131021 - 1"-"S131021-4" 2011.9
-
S131011 Wire structure forming by laser forming
IITSUKA Yuya, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S131011 - 1"-"S131011-3" 2011.9
-
S142031 Toolpath generation for 3D processing by 8-axis redundant robot system
SEKIGUCHI Shota, ZHU* Jiang, TANAKA Tomohisa, SAITO Yoshio
Mechanical Engineering Congress, Japan 2011 "S142031 - 1"-"S142031-5" 2011.9
-
215 Robust Production Scheduling Using Autonomous Distributed Systems
Oike Shunsuke, Tanaka Tomohisa, Zhu Jiang, Saito Yoshio
Manufacturing Systems Division Conference 2011 85 - 86 2011.3
-
D29 Accuracy maintenance using the measured date of already processed part after workpiece position is changed
SHINTAKU Kengo, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
The ... Manufacturing & Machine Tool Conference 2010 ( 8 ) 243 - 244 2010.11
-
A1 Optimal Tool Path Generation Method for Freeform Surface Machining(Digital design and digital manufacturing(CAD/CAM))
HARANUD Zuanshi, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009 ( 5 ) 3 - 8 2009.12
-
E20 Excimer Laser 3D Machining Based on Irradiation Pulse Number Control(Laser processing)
SUZUKI Ryo, ZHU Jiang, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009 ( 5 ) 581 - 584 2009.12
-
A4 Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning(Digital design and digital manufacturing(CAD/CAM))
WANG Xiaoyi, WANG Quanxian, SAITO Yoshio, ZHU Jiang, TANAKA Tomohisa
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009 ( 5 ) 21 - 26 2009.12
-
C6 Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator(Multi-axis control machining)
ZHU Jiang, TANABE Ryota, TANAKA Tomohisa, SAITO Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009 ( 5 ) 133 - 138 2009.12
-
1104 Tool path generation for the 3D model's machining by multi-axis processing system
Feng Fei, Zhu jiang, Tanaka Tomohisa, Saito Yosio
Manufacturing Systems Division Conference 2009 19 - 20 2009.3
-
C29 Study on Feature Area Extraction for Freeform Surface Based on Mesh Simplification
Zhu Jiang, Haranud Zuanshi, Tanaka Tomohisa, Saito Yoshio
The ... Manufacturing & Machine Tool Conference 2008 ( 7 ) 263 - 264 2008.11
-
1302 Study on freeform surface tool path generation method
Haranud Zuanshi, Zhu Jiang, Tanaka Tomohisa, Saito Yoshio
Manufacturing Systems Division Conference 2008 59 - 60 2008.7
-
1301 Rough Cutting Model Generation for Freeform Surface Machining
Zhu Jiang, Tanaka Tomohisa, Saito Yoshio
Manufacturing Systems Division Conference 2008 57 - 58 2008.7
-
106 Measurement using Polar Coordinate Desktop Machine Tool
TAKENAKA Masaaki, TANAKA Tomohisa, SAITO Yoshio
The ... Manufacturing & Machine Tool Conference 2006 ( 6 ) 11 - 12 2006.11
-
Investigation of Constraints for Optimization of Turning Process by GA with Self-Organizing Penalty Strategy
AHMAD N., TANAKA Tomohisa, SAITO Yoshio
Proc. of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, 2005 2 319 - 324 2005
-
Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear
Nafis Ahmad, Tanaka Tomohisa, Saito Yoshio
The ... Manufacturing & Machine Tool Conference 2004 ( 5 ) 305 - 306 2004.11
-
Study on Excimer Laser Ablation for Polymer
Sugaya Kenjirou, Tanaka Tomohisa, Saito Yoshio
The ... Manufacturing & Machine Tool Conference 2004 ( 5 ) 183 - 184 2004.11
-
308 An Approximation of Free-Formed Surface for NC Machining
Sugie Takashi, Tanaka Tomohisa, Akbari Javad, Saito Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2003 457 - 460 2003
-
Desktop Electro-Discharge Machine with PC Control
YAKABE Yoshiyuki, YAMADA Yousuke, TANAKA Tomohisa, AKBARI Javad, SAITO Yoshio, KATO Kazuhiko, ENOMOTO Sinzou, SATOH Takashi, ENDO Chiaki
The ... Manufacturing & Machine Tool Conference 2002 ( 4 ) 131 - 132 2002.11
-
超音波センサを持つロケータによる粗さ面接触特性の実験的研究
歌田 英司, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 2 ) 605 - 605 2002.10
-
超音波センサ組み込みソフトフィンガによる把持状態の検出
今村 光広, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 2 ) 606 - 606 2002.10
-
画像情報に基づく多面体形状の自動認識に関する研究(第2報) : 輪郭内部頂点を用いたパターンの定性記述
芦塚 正博, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 2 ) 548 - 548 2002.10
-
発泡スチロールの熱線加工メカニズムに関する研究 : (第2報)熱伝達・輻射を考慮した解析
牟田 憲太郎, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 2 ) 488 - 488 2002.10
-
多軸ロボットによる自由曲面生成アルゴリズムの構築
吉柳 一郎, 斎藤 義夫, JAVAD Akbari, 田中 智久
精密工学会大会学術講演会講演論文集 2002 ( 2 ) 51 - 51 2002.10
-
発泡スチロールの熱線加工メカニズムに関する研究
牟田 憲太郎, 田中 智久, AKBARI Javad, 斉藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 662 - 662 2002.3
-
環境対応型工作機械用ミストセンサの開発
山中 暁, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 62 - 62 2002.3
-
自由曲面形状の創成と計測に関する研究
杉田 芳史, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 257 - 257 2002.3
-
工作機械の環境への2次的影響
小山田 圭吾, 田中 智久, AKBARI Javad, 斉藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 144 - 144 2002.3
-
超音波接触判定センサを持つロケータの開発
歌田 英司, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 337 - 337 2002.3
-
画像情報に基づく多面体形状の自動認識に関する研究
黄 士元, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 248 - 248 2002.3
-
ロボットの把持動作に関する学習制御
坂谷内 篤, 田中 智久, AKBARI Javad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 206 - 206 2002.3
-
工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究
前田 陽介, 田中 智久, AKBARL Jawad, 斎藤 義夫
精密工学会大会学術講演会講演論文集 2002 ( 1 ) 14 - 14 2002.3
Presentations
-
Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway International conference
Yasunori SAKAI, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito
MECHATRONICS 2014 2014
-
トランケーションが及ぼす接触特性への影響
芦塚正博, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
極座標型デスクトップマシンツールを用いた加工と計測
深見徹, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
グラフを用いた複合加工機のための自動加工工程設計システム
加藤雅人, 朱疆, 吉岡勇人, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
高分子材料へのエキシマレーザアブレーション加工に関する研究
菅谷健二郎, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
NURBS曲面の分割による高効率加工パスの生成
穂積昭充, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2013 2013
-
摩耗モード遷移モデルの実験的検証
上原匠, 田中智久, 京極啓史, 中原綱光
トライボロジー会議2003春 東京 2003
-
三次元形状モデルからの加工工程自動決定システムの開発
武藤沙織, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2013 2013
-
弾性変形拡張方式を利用したホーニングツールの開発
深見徹, 田中智久, Akbari Javad, 斎藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2003 2003
-
Additive Manufacturing of Custom-made Hip Implants
Osama Abdelaal, Jiang Zhu, Tomohisa Tanaka, Saied Darwish, Yoshio Saito
The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013 2013
-
An Approximation of Free-Formed Surface for NC Machining International conference
T.SUGIE, T.TANAKA, J.AKBARI, Y.SAITO
International Conference on Leading Edge Manufacturing in 21st Century, Niigata 2003
-
多分解能メッシュによる多軸加工機の粗加工の効率化
長谷川将臣, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2013 2013
-
Ultrasonic Tactile Sensor for Robot Gripper International conference
J. Akbari, M.Imamura, T. Tanaka, Y. Saito
International Conference on Leading Edge Manufacturing in 21st Century, Niigata 2003
-
ステンレス線材へのレーザフォーミングの適用
大石真也, 田中智久, 朱疆, 齋藤義夫
日本機械学会生産システム部門講演会2013 2013
-
Sensor Integrated Locator for Intelligent Fixture International conference
Javad Akbari, Eiji Utada, Tomohisa Tanaka, Yoshio Saito
6th International Conference on Mechatronics Technology 2002
-
切削条件がPTFEの加工面性状に与える影響に関する研究
原幹也, 朱疆, 田中智久, 齋藤義夫
ABTEC2013砥粒加工学会学術講演会 2013
-
コンポジットめっきの超精密切削に関する研究
高本尚志, 田中智久, Akbari Javad, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
Titanium Coloring Mechanism through Laser Irradiation International conference
Xu Zhou, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito
5th International Conference of Asian Society for Precision Engineering and Nanotechnology 2013
-
工作機械の消費電力に関する測定と評価
下河辺, 原雄太, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
Development of Automatic Machining Process Deciding System Based on 3D-Model International conference
Jiang ZHU, Saori MUTO, Tomohisa Tanaka, Yoshio SAITO
7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2013
-
全反射光を利用した粗さ面すべり接触部の真実接触面積測定
田中智久, 杉山 聡, 山中力, 桃園聡, 京極 啓史, 中原 綱光
トライボロジー会議2004秋 鳥取 2004
-
切削条件が PTFE エンドミル加工の切削抵抗に及ぼす影響
原 幹也, 朱 疆, 田中 智久, 齋藤 義夫
2014年度砥粒加工学会学術講演会 2014
-
超小型工作機械用高速主軸の開発とMQL加工への適用
福永悦史, 田中智久, Akbari Javad, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
Study on the Laser Forming of Thin Stainless-steel Wire International conference
Tomohisa Tanaka, Shinya Oishi, Jiang Zhu, Yoshio Saito
5th International Conference of Asian Society for Precision Engineering and Nanotechnology 2013
-
ＭＱＬ加工用ミストセンサの開発
飯田喜洋, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
放電加工を利用した積層造型法のツールパス生成
朱疆, 後藤純平, 田中智久, 齋藤義夫
The 9th Manufacturing & Machine Tool Conference 2012
-
PC制御デスクトップマシンによる放電加工機
矢ヶ部善幸, 山田洋維祐, 田中智久, アキバリ ジャワド, 斎藤義夫
The 4th Manufacturing & Machine Tool Conference 2002
-
レーザ照射によるチタン酸化被膜の発色メカニズムに関する研究
周煦,朱疆, 田中智久, 齋藤義夫
The 9th Manufacturing & Machine Tool Conference 2012
-
ロボットの把持動作に関する学習制御
坂谷内篤, 田中智久, Javad Akbari, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
レーザフォーミングによる細線構造物の造形に関する研究
飯塚祐哉, 朱 疆, 田中 智久, 齋藤 義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2012 2012
-
発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―
牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
8軸冗長ロボットシステムを用いた加工システムの構築
関口 翔太, 朱 疆, 田中 智久, 齋藤 義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2012 2012
-
多軸ロボットによる自由曲面生成アルゴリズムの構築
吉柳一郎, 田中智久, Akbari Javad, 斎藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT) International conference
Jiang Zhu, Akira Yanagisawa, Tomohisa Tanaka, Yoshio Saito
6th International Conference on MicroManufacturing ICOMM/2011 2011
-
自由曲面形状の創成と計測に関する研究
杉田芳史, 田中智久, Javad Akbari, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
Research on the Structural Color Appearance of Titanium by Laser Irradiation International conference
Xu Zhou, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
15th International Machine Tool Engineers` Conference 2012
-
工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究
前田陽介, 田中智久, Akbari Javad, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
レーザを用いた金属樹脂混成積層造形に関する研究
塚崎 遥, 朱 疆, 田中 智久, 齋藤 義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2012 2012
-
発泡スチロールの熱線加工メカニズムに関する研究
牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
6-DOFパラレルメカニズムのワークテーブルの誤差要因解析
張遠瑞, 武 建涛, 朱 疆, 田中 智久, 齋藤 義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2012 2012
-
超音波接触判定センサを持つロケータの開発
歌田英司, 田中智久, Javad Akbari, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table International conference
Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
15th International Machine Tool Engineers` Conference 2012
-
環境対応型工作機械用ミストセンサの開発
山中暁, 田中智久, Akbari Javad, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
多分解能メッシュによるターニングセンタの粗加工工程の検証
長谷川将臣, 朱疆, 田中智久, 齋藤義夫
日本機械学会生産システム部門研究発表講演会2012 2012
-
工作機械の環境への2次的影響
小山田圭吾, 田中智久, Akbari Javad, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
Rough machining process and its simulation for robot integraged surface sculpturing system International conference
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
4th IASTED International Conference on Circuits, Signals, and Systems 2006
-
Optimization of End Milling Operation By Genetic Algorithm based on Self Organizing Adaptive Penalty Strategy International conference
Nafis AHMAD, Tomohisa TANAKA, Yoshio SAITO
12th Asia Pacific Management Conference XII-2006 2006
-
An 8-axis robot based rough cutting system for surface sculpturing International conference
Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito
Towards Synthesis of Micro-/Nano-systems 2006
-
Study on The Contact Characteristics of Truncated Surfaces International conference
Tomohisa Tanaka, Masahiro Ashizuka, Yoshio Saito, Tsunamitsu Nakahara
3rd Asia International Conference on Tribology 2006
-
CAMシステムを利用したポケット形状加工の体系化
下河辺学, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2006
-
エキシマレーザ加工による高分子材料の3次元形状創成
菅谷健二郎, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2006
-
トランケーションが及ぼす接触特性への影響(第2報) ―全反射光を利用した真実接触面積測定実験による検討―
芦塚正博, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2006
-
多軸ロボットシステムによる形状計測と精度評価
飯田喜洋, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2006
-
一体構造による工作機械の小型軽量化に関する研究
川俣敦史, 齋藤義夫, 田中智久
Autumn Annual Meeting of the Japan Society for Procession Engineering 2007 2007
-
球状凸面と平面の接触における全反射接触部観察の特性評価
田中智久, Leban Bruno, 齋藤義夫, 陳樺,石田誠
トライボロジー会議 2005秋 東京 2007
-
弾性変形拡張方式によるホーニングツールの開発
高下法子, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
Flexible Manufacturing Scheduling International conference
Shunsuke Oike, TOMOHISA TANAKA, YOSHIO SAITO
13th Internation Conference on Machine Design and Production 2008
-
Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation International conference
JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO, Lining Sun
13th Internation Conference on Machine Design and Production 2008
-
8-axis Surface Sculpturing System by Heated Cutting Tools International conference
Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
ICCES’08(International Conference on Computational & Experimental Engineering and Science) 2008
-
Tool Path Generation Method for Freeform Surface Machining International conference
Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito
ICCES’08(International Conference on Computational & Experimental Engineering and Science) 2008
-
一体構造による工作機械の小型軽量化に関する研究
川俣敦史, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2008 2008
-
高周波誘導加熱によるCFRPの成形過程
本田兼基, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2008 2008
-
Freeform surface sculpturing and measurement system based on 8-axis robot system International conference
Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
13th International Machine Tool Engineers' Conference 2008
-
Measurement and machining using polar coordiante desktop machine tool International conference
Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
13th International Machine Tool Engineers' Conference 2008
-
工作機械に適した6軸パラレルメカニズムを用いたワークテーブルの開発
小森正裕, 齋藤 義夫, 田中 智久, 朱 疆
2009年度砥粒加工学会学術講演会 2009
-
Measurement and Machining by using Polar Coordinate Desktop Machine Tool International conference
Ryo Tanabe, Yoshio Saito, Tomohisa Tanaka
ICCES’08(International Conference on Computational & Experimental Engineering and Science) 2008
-
極座標型デスクトップマシンツールを用いた加工
田辺龍太, 朱疆, 田中智久, 齋藤義夫
2008年度精密工学会秋季大会学術講演会 2008
-
CG画像簡略化技術を利用した自由曲面特徴領域の抽出に関する研究
朱 疆, ハラノド ジョンシ, 田中 智久, 齋藤 義夫
The 7th Manufacturing & Machine Tool Conference 2008
-
8軸加工システムの高機能化に関する研究
野村佳佑, 朱 疆, 田中 智久, 齋藤 義夫
日本機械学会2008年度年次大会 2008
-
多軸ロボットシステムによる非接触三次元形状計測
棚瀬雅貴, 朱疆, 田中智久, 齋藤義夫
2008年度精密工学会秋季大会学術講演会 2008
-
A Study on Miniature Automatic Tool Changer for Desktop Machine Tool International conference
Guanglei Liu, Tomohisa Tanaka, Yoshio Saito
5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2007
-
A Surface Sculpturing System Based on 8-Axis Robot International conference
Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito
International Conference on Advanced Design & Manufacturing, ICADM-2007 2007
-
Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System International conference
Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito
4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21 2007
-
自由曲面加工に適した工具パスの生成方法
ハラノド ジョンシ, 朱 疆, 田中 智久, 齋藤 義夫
日本機械学会生産システム部門講演会2008 2008
-
自由曲面加工に適した粗加工モデルの生成
朱 疆, 田中 智久, 齋藤 義夫
日本機械学会生産システム部門講演会2008 2008
-
複合加工に適した工程設計システム
波田純一, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2008 2008
-
Study on the accuracy improvement for laser forming processing of micro-wire International conference
JIANG ZHU, Akira Tajima, TOMOHISA TANAKA, Hayato Yoshioka
9th International Conference on Leading Edge Manufacturing in 21st Century 2017
-
すべり接触する突起の真実接触部挙動観察
田中智久, 高下法子, Leban Bruno, 齋藤義夫
2007年度 砥粒加工学会学術講演会 2007
-
静的状態での転がり 案内キャリッジに用 いる転動体の接触状 態の解明
井上悟史, 酒井康徳, 田中智久, 吉岡勇人, 朱疆, 星出薫, 古澤竜二
Spring Annual Meeting of the Japan Society for Procession Engineering 2017 2017
-
直動型パラレルメカニズムの機構特性
小森正裕, 齋藤義夫, 田中智久
Autumn Annual Meeting of the Japan Society for Procession Engineering 2007 2007
-
膜形成モード制御によるチタンへのレーザカラーリング
呉境瑩, 田中智久, 朱疆, 酒井康徳
Spring Annual Meeting of the Japan Society for Procession Engineering 2018 2018
-
Study on constant scallop height tool path generation for freeform surface machining
Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito
Autumn Annual Meeting of the Japan Society for Procession Engineering 2007 2007
-
金属と樹脂を複合した異方剛性を有するパッシブダンパの動特性に及ぼす幾何形状の影響
小林俊矢, 酒井康徳, 田中智久, 朱疆
Spring Annual Meeting of the Japan Society for Procession Engineering 2018 2018
-
複合加工に適した工程設計システム
波田純一, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2007 2007
-
Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering International conference
Muslimin,Zhu, J, Yoshioka, H, Tanaka, T
International Symposium on Flexible Automation 2016
-
チタンへのレーザ照射条件が表面性状及び発色に与える影響
堀田 駿介, 吉岡 勇人, 朱 疆, 田中 智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2017 2017
-
粗さ接触面の接触過酷度に及ぼすなじみの影響に関する理論的検討
田中智久, 中原綱光
トライボロジー会議 2007秋 佐賀 2007
-
金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響
酒井康徳, 田中智久, 朱疆
Spring Annual Meeting of the Japan Society for Procession Engineering 2017 2017
-
マシニングセンタ用ホーニングツールの実用化に関する研究
田中智久, 木村雄一郎, 齋藤義夫, 汲田孝行, 駒井保宏
2007年度砥粒加工学会学術講演会 2007
-
デスクトップ型工作機械に適した小型自動工具交換装置に関する研究
劉光磊, 斉藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2007
-
エンドミル加工におけるスピンドルスルーMQLの効果
川俣敦史, 齋藤義夫, 田中智久
2007年度 砥粒加工学会学術講演会 2007
-
粗面の接触特性に及ぼす接線力の影響
高下法子, 田中智久, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2007
-
極座標型計測・加工装置の誤差補正に関する研究
竹中正彬, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2007
-
転がり案内の非線形な周波数応答に及ぼす潤滑油の影響
酒井康徳, 朱 疆, 吉岡 勇人, 田中 智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2016 2016
-
金属極細線のレーザフォーミングにおける加工精度向上手法の研究
田島彬, 吉岡 勇人, 朱 疆, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2016 2016
-
転がり案内を模擬した接触減衰評価装置の試作
酒井康徳, 深澤奏, 朱 疆, 吉岡 勇人, 田中 智久, 星出 薫, 古澤竜二
日本機械学会関東支部第22期総会講演会 2016
-
YVO4レーザを用いたチタンへのカラーリング-加工条件と発色の関係-
堀田 駿介, 吉岡 勇人, 朱 疆, 田中 智久
日本機械学会関東支部第22期総会講演会 2016
-
転動体の接触状態が転がり案内の減衰に及ぼす影響
深澤奏, 酒井康徳, 朱 疆, 吉岡 勇人, 田中 智久, 星出 薫, 古澤竜二
日本機械学会関東支部第22期総会講演会 2016
-
熱硬化性樹脂の制振性に及ぼすフィラー条件の影響
酒井康徳, 田中智久, 朱疆
The 11th Manufacturing & Machine Tool Conference 2016
-
Titanium Coloring Machining by Laser Irradiation International conference
Shunsuke Hotta, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka
17th International Machine Tool Engineers` Conference 2016
-
Influence of Designing Parameters on Vibration Damping of Rolling Guideway International conference
Yasunori Sakai, So Fukasawa, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Kaoru Hoshide, Ryuji Furusawa
16th International Conference on Precision Engineering 2016
-
Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium International conference
Jiang Zhu, Shunsuke Hotta, Hayato Yoshioka, Tomohisa Tanaka
8th Japan-Taiwan workshop on mechanical engineering and aerospace 2016
-
Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium International conference
Shunsuke Hotta, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka
16th International Conference on Precision Engineering 2016
-
レーザフォーミングによる細線構造物造形
飯塚裕哉, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
5軸制御によるサポートフリーRP装置の開発
塚崎 遥, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
三次元モデルの比較による形状評価システムの構築
武隈裕一, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2011 2011
-
粗さ接触面における接触部直接観察による高荷重摩耗特性評価
久保喬弘, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2011 2011
-
Generating the Measurement Points Based on Finishing NC Data International conference
Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu
2011 IEEE International Conference on Mechatronics (ICM) 2011
-
超音波センサ組み込みソフトフィンガによる把持状態の検出
今村光広, 田中智久, Akbari Javad, 斎藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear International conference
Tsunamitsu Nakahara, Tomohisa Tanaka
International Tribology Conference, Hiroshima 2011 2011
-
画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―
芦塚正博, 田中智久, Akbari Javad, 斎藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
画像情報に基づく多面体形状の自動認識に関する研究
黄 士元, 田中智久, Akbari Javad, 斎藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2002 2002
-
PMMAの三次元形状加工に向けたエキシマレーザアブレーションの加工特性
小倉康平, 田中智久, 朱疆, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2011 2011
-
An Estimation of Threshold of Mild and Severe Wear Based on Burwell-Strang's Concept by ELastic-Plastic Analysis on Rough Surface Contact International conference
TOMOHISA TANAKA
International Tribology Conference Nagasaki, 2000 2000
-
三次元形状モデルからの加工法自動決定システムの開発
奈良部優介, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2011 2011
-
カム-フォロワ間の熱的潤滑解析
田中智久
日本機械学会1997年度年次大会 1997
-
Manufacturing Feature Extraction System of 3D-Model for Process Planning International conference
Jiang Zhu, Yusuke Narabu, Tomohisa Tanaka, Yoshio Saito
6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2011
-
The Effect of Shear on Transition of Load Condition in 2D Contact of Rough Surfaces International conference
Tomohisa TANAKA, Keiji KYOGOKU, Tsunamitsu NAKAHARA
2nd World Tribology Congress 2001
-
The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region International conference
Takahiro Kubo, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2011
-
微小すべり下のマイルドからシビア摩耗への遷移判別 -凝着観察による-
田中智久
トライボロジー会議2001春 東京 2001
-
多分解能メッシュによるターニングセンタの高効率化加工
野村佳佑, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2010 2010
-
Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh International conference
Jiang Zhu, Keisuke Nomura, Tomohisa Tanaka, Yoshio Saito
14th International Conference on Mechatronics Technology 2010
-
加工のためのCADモデル特徴領域の自動抽出
奈良部優介, 朱疆, 田中智久, 齋藤義夫
日本機械学会北陸信越支部第47期総会・講演会 2010
-
レーザーを用いた異種材料混成造形物創成のための基礎的研究
西尾 拓, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
チタンへのレーザ照射による構造色の発見に関する研究
木下 真也, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
6軸制御ワイヤ放電加工機用加工支援システムの作成
穂積 昭充, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
RP装置による三次元形状の創成と評価
武藤沙織, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
Freeform Surface Machining and Measurement by 8-axis Robot System International conference
Shota Sekiguchi, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO
14th International Machine Tool Egineers' Conference 2010
-
8軸冗長ロボットシステムによる三次元加工
関口 翔太, 朱 疆, 田中 智久, 齋藤 義夫
JSME annual meeting 2011 2011
-
自律分散システムを応用した堅牢な生産スケジューリングシステム
大池 瞬介, 田中 智久, 朱 疆, 齋藤 義夫
JSME annual meeting 2011 2011
-
Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning International conference
Xiaoyi Wang, Quanxian Wang, Yoshio Saito, Jiang Zhu, Tomohisa Tanaka
5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2009
-
Optimal Tool Path Generation Method for Freeform Surface Machining International conference
Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2009
-
2.5軸輪郭加工に適した高効率加工パスの生成
西山浩司, 朱疆, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2010 2010
-
既加工部の形状測定データを利用したワーク付け替え時における精度維持
新宅健吾, 朱疆, 田中智久, 齋藤義夫
生産と加工に関する学術講演会2010 2010
-
6軸パラレルメカニズムを用いたワークテーブルの開発
小森正裕, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2010 2010
-
高荷重域における粗さ接触表面下の塑性変形状態判別
久保喬弘, 朱疆, 田中智久, 齋藤義夫
ABTEC2010砥粒加工学会学術講演会 2010
-
Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools International conference
Masahiro Komori, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
3rd International Conference of Asian Society for Precision Engineering and Nanotechnology 2009
-
Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator International conference
Jiang Zhu, Ryota Tanabe, Tomohisa Tanaka, Yoshio Saito
5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2009
-
Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces International conference
Tomohisa TANAKA, Bruno LEBAN, Takahiro KUBO, Yoshio SAITO, Massimiliano PAU, Hua CHEN, Makoto ISHIDA
8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems 2009
-
Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface International conference
Yusuke Narabu, Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
3rd International Conference of Asian Society for Precision Engineering and Nanotechnology 2009
-
自由曲面ミル加工のための形状に基づくパス選択
奈良部優介, ハラノドジョンシ,朱疆, 田中智久, 齋藤義夫
日本機械学会2009年度年次大会 2009
-
多軸加工システムによる３Dモデルの加工に適用するツールパスの生成
馮飛,朱疆, 田中智久, 齋藤義夫
日本機械学会生産システム部門講演会2009 2009
-
極座標型デスクトップマシンツールによる３次元形状の加工と計測
田辺龍太, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
多軸ロボットシステムによる非接触三次元形状計測パスの生成方法
棚瀬雅貴, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
パルス数制御による高分子材料の自由曲面レーザアブレーション加工
鈴木 僚, 朱 疆, 田中 智久, 齋藤 義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
A New Assembly Model Capable of Reorganizing Assembly Structure
Xiaoyi Wang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Autumn Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
作業区間をシェルに内包する小型工作機械
鈴木純, 朱疆, 田中智久, 齋藤義夫
日本機械学会2009年度年次大会 2009
-
粗さ面の真実接触部判定の高精度化に関する研究
久保喬弘, 朱疆, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
セラミックスのフルモールド成形法に関する研究
武隈裕一, 朱疆, 田中智久, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2009 2009
-
Excimer Laser 3D Machining Based on Irradiation Pulse Number Control International conference
Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 2009
-
切削条件がPTFEの加工面精度に与える影響に関する研究
原幹也, 朱疆, 吉岡勇人, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data
Saurabh Bhide, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
転がり案内における非線形摩擦に起因する振動の複素ばねモデルを用いた解析
酒井康徳, 吉岡勇人, 朱疆, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
分割領域毎の最適加工パスによる自由曲面加工の効率化
長瀬重信, 朱疆, 吉岡勇人, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part
Muslimin,Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine International conference
Jiang Zhu, Masato Kato, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka
6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015) 2015
-
チタンへのレーザ照射による構造色に関する研究?色再現性の向上と広色空間の実現
原田将, 朱 疆, 田中智久, 吉岡勇人, 齋藤義夫
日本機械学会生産システム部門研究発表講演会2015 2015
-
自律分散システムを用いた柔軟な生産スケジューリングシステムの構築
高卉?,朱疆, 吉岡勇人, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2015 2015
-
Fundamental Study for Control of Hue and Brightness in the Laser Coloring International conference
Tomohisa Tanaka, Syo Harada, Jiang Zhu, Hayato Yoshioka, Yoshio Saito
8th International Conference on Leading Edge Manufacturing in 21st Century 2015
-
The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part International conference
Muslimin,Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito
8th International Conference on Leading Edge Manufacturing in 21st Century 2015
-
Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy International conference
Nafis AHMAD, Tomohisa TANAKA, Yoshio SAITO
3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya 2005
-
3D mesh simplification for freeform surfacing International conference
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Tehran International Congress on Manufacturing Engineering (TICME2005) 2005
-
A new mesh simplification algorithm for the application of surface sculpturing International conference
Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics 2005
-
The Effect of Interaction between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces International conference
Tomohisa TANAKA, Chikara YAMANAKA, Keiji KYOGOKU, Tsunamitsu NAKAHARA
3rd World Tribology Congress 2005
-
8軸制御曲面加工システムの構築とそのプログラミング
杉恵貴史, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
Optimization of Cutting Parameters for End Milling Operation by SOAP Based Genetic Algorithm International conference
N.Ahmad,T.Tanaka, Y.Saito
6th Int. Conf. on Mech. Engr. 2005
-
工作機械の消費電力評価方法の構築
原雄太, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2005 2005
-
極座標型デスクトップマシンツールを用いた計測
竹中正彬, 田中智久, 齋藤義夫
The 6th Manufacturing & Machine Tool Conference 2006
-
Measurement of true contact area by means of elliptical polarized light reflection under slip condition International conference
T.Tanaka, S.Sugiyama, C.Yamanaka, S.Momozono, K.Kyogoku, T.Nakahara
International Tribology Conference Kobe 2005
-
MQL加工用ミストセンサの開発
本田兼基, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2006 2006
-
3D Model Registration Based on Feature Extraction Using Segmentation
Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito
Spring Annual Meeting of the Japan Society for Procession Engineering 2014 2014
-
Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear
ナフィス・アハマッド, 田中智久, 齋藤義夫
The 5th Manufacturing & Machine Tool Conference 2004
-
ステンレス線材のレーザフォーミングメカニズムに関する研究
大石真也, 田中智久, 朱疆, 齋藤義夫
日本機械学会生産システム部門講演会2014 2014
-
高分子材料へのエキシマレーザアブレーション加工に関する研究
菅谷健二郎, 田中智久, 齋藤義夫
The 5th Manufacturing & Machine Tool Conference 2004
-
Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable International conference
yuanrui zhang, JIANG ZHU, Hayato Yoshioka, YOSHIO SAITO, TOMOHISA TANAKA
16th International Machine Tool Engineers` Conference 2014
-
真実接触面積に及ぼす接線力の影響
田中智久, 京極啓史, 中原綱光
トライボロジー会議 2005秋 東京 2005
-
Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction International conference
Yasunori Sakai, JIANG ZHU, TOMOHISA TANAKA, Hayato Yoshioka, YOSHIO SAITO
16th International Machine Tool Engineers` Conference 2014
-
An Experimental Investigation on EDM Process Using a Desktop Machine Tool International conference
Javad AKBARI, Shinzo ENOMOTO, Kazuhiko KATO, Yoshiyuki YAKABE, Tomohisa TANAKA, Yoshio SAITO
ICoPE2003/2004 2004
-
加振力振幅が直動転がり案内の動特性に及ぼす影響
酒井康徳, 花岡俊樹, 朱疆, 齋藤義夫, 田中智久
Spring Annual Meeting of the Japan Society for Procession Engineering 2014 2014
-
レーザを用いた金属細線の積層による3次元形状の創成
前田直輝, 朱疆, 田中智久, 齋藤義夫
日本機械学会生産システム部門講演会2014 2014
-
デスクトップ型工作機械用オートアライメント機構の開発
山田維祐, 大野竜太, 田中智久, Akbari Javad, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化
小池勇樹, 朱疆, 田中智久, 齋藤義夫
Spring Annual Meeting of the Japan Society for Procession Engineering 2014 2014
-
発泡スチロールのエキシマレーザ加工に関する研究
歌田英司, 菅谷健二郎, 田中智久, Akbari Javad, 齋藤義夫
Autumn Annual Meeting of the Japan Society for Procession Engineering 2004 2004
-
有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定
酒井康徳, 朱, 吉岡勇人, 田中智久
日本機械学会2015年度年次大会 2015
Industrial property rights
-
加工ツール及びこれを用いた穴加工機
田中 智久, 酒井 康徳
-
加工ツールを用いた穴加工機
田中 智久, 酒井 康徳
-
制振ダンパ
田中 智久, 酒井 康徳
-
制振ダンパ
田中 智久, 酒井 康徳
Research Projects
-
Development of innovative drilling technology using cutting action by combined expansion/torsion vibration
Grant number：25K01130 2025.4 - 2028.3
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)
Grant amount：\15210000 （ Direct Cost: \11700000 、 Indirect Cost：\3510000 ）
-
Development of a safe and efficient electrical scalpel by real-time measurement of local tissue stiffness
Grant number：21K19894 2021.7 - 2024.3
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Challenging Research (Exploratory)
Grant amount：\6240000 （ Direct Cost: \4800000 、 Indirect Cost：\1440000 ）
-
Development of Micro Ultrasonic Knurling Technology for High Strength Texturing to Large Area Sliding Surface
Grant number：18K03890 2018.4 - 2021.3
Japan Society for Promotions of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
Aoki Shigeru
Grant type：Competitive
The friction force is controlled by developing technology creating small textures on the surface at a few to a few hundred micrometer intervals. If friction force is reduced by applying this technology to large area sliding surfaces, the machining effect is drastically improved. In this study, knurling is focused on creating texture. Machining technology is developed to create wear-resistant texture on large area sliding surfaces with high precision and efficiency using ultrasonic vibration during knurling. The effect of ultrasonic vibration on creating texture using knurling is examined. In the experiment of making a groove on the surface with an indenter using a 2-dimensional table, pressing force and friction force are reduced using ultrasonic vibration. In the experiment of creating latticed texture on the surface, deeper and clearer marks are formed using ultrasonic vibration. The texture is created precisely and efficiently using ultrasonic vibration.
-
転動体の接触剛性を考慮した工作機械送り駆動機構の高度動解析システムの開発
2016.4 - 2019.3
日本学術振興会 科学研究費補助金
酒井康徳
Grant type：Competitive
-
Clarification of the laser coloring mechanism and its application to high precision multi-color printing
Grant number：26420041 2014.4 - 2017.3
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
Tanaka Tomohisa
Grant amount：\5070000 （ Direct Cost: \3900000 、 Indirect Cost：\1170000 ）
The main purpose of this research is to clarify the mechanism of laser coloring and to develop a new technology of metallic coloring. The principle is to use laser irradiation to generate a thin oxide film on the target surface, and color can be observed due to the light interference phenomena. In this research, a new oxide film generation device was developed. The affection of the laser irradiation parameter to the oxide film generation and the observed color was clarified. By carefully control the thickness and surface profile of the oxide film, precision coloring with multiple colors are realized on different kinds of metallic materials.
-
Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.
Grant number：22360058 2010 - 2012
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)
SAITO Yoshio, TANAKA Tomohisa, ZHU Jiang
Grant amount：\18720000 （ Direct Cost: \14400000 、 Indirect Cost：\4320000 ）
Increasing a usage of 3D free-form surface, it is necessary to confirm an accuracy of machined surface compared with designed one. However, it is difficult to investigate a difference between them due to huge of data for free-form surface and time consuming of measurement. Therefore, machining and measuring processes must be combined to produce a free-form surface. Applying simplification procedure in CG field, new machining system with measuring process for free-form surface of polystyrene foam was proposed and significant information was obtained as a result.
-
機能表面の幾何形状がすべり接触特性に及ぼす影響
Grant number：17760117 2005 - 2006
日本学術振興会 科学研究費助成事業 若手研究(B)
田中 智久
Grant amount：\3500000 （ Direct Cost: \3500000 ）
従来,粗さを持つ表面の接触に関する研究では考慮されていないが,接触状態に大きな影響を与えると考えられる2つの効果,すなわち,なじみにより表面粗さ突起の先端が平滑化(トランケーション)することによる効果,および,接触部において接線方向力が作用する効果について,理論計算による推定と実験による計算結果の検証を試みた.初年度は,トランケーションの影響について検討を行った.具体的には,まず数値的にトランケーションされた粗さ面を生成し,そのデータを基に接触解析を行って粗さパラメータが接触状態に与える影響を調べた.この理論解析から,なじみにより生成される平滑部分の粗さの影響が支配的であり,残った谷部はほとんど影響を与えない事がわかった.続いて,この理論接触解析の妥当性評価のために,全反射を利用した真実接触面積観察試験機を製作し,球面上の粗さと平滑面の接触における接触荷重やなじみパラメータが真実接触面積に与える影響について観察実験を行った.この観察結果は粗さパラメータと荷重の影響に関して理論推定結果と定性的に一致したが,理論による定量的な接触状態の推定には真実接触部の塑性変形モデルの高精度化が必要であることがわかった.
続く年度では,接触部に働く接線力が接触状態に与える影響を,従来広く用いられてきている統計手法を用いた接触理論に組み込むために,突起接触モデルの修正を行った.すなわち,突起接触部において接線力が加わった際に,それがない場合と比してより低い垂直荷重下で内部の降伏が始まることに着目して接触部の接線力を考慮した接触モデルの提案を行い,接線力と真実接触面積の関係を導いた.同時に,前年度に製作した観察試験機に,すべり方向変位を与える機構を付加する改良を施して観察試験を行ったが,理論と比較し得るだけの観察精度を得るには至らなかった. -
Development of 3D Digital Proto-Typing Machine Based on Multi-Axes Controlled Hot-Wire Cutting for Polystyrene Foam
Grant number：15360067 2003 - 2004
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)
SAITO Yoshio, TANAKA Tomohisa
Grant amount：\15300000 （ Direct Cost: \15300000 ）
3D digital proto-typing for polystyrene foam was carried out by using newly developed machine which combined multi-joint robot and table unit with two rotary motions. As a result, we obtained useful and worth remarks as follows.
(1)To generate three dimensional form data suitable for 3D digital proto-typing machine, and to propose a new method of transferring for the path of multi-joint robot.
As for the free form surface, there are no explicit data and then we developed an automated path generation process using three dimensional form data.
(2)To estimate the performance of developed 3D digital proto-typing machine, to propose a high speed control system and to investigate the relationship between accuracy of machine movement and precision of machined surface of polystyrene foam.
In the case of hot-wire cutting process, force is negligible small compared with the metal cutting process. Therefore, it is allowed to move with higher speed and to control the robot system in complicated path is important subject. Appropriate control methods were adopted and examined for form shaping of polystyrene.
(3)To make clear the machining mechanism of polystyrene foam, to find out suitable cutting condition and to decide a proper shape of hot-wire considering free form surface.
The phenomena of hot-wire cutting were discussed and the thermal decomposition and thermal melting were simulated based on the combined model. Through the numerical analysis, optimum cutting condition was cralified.
Summing up these results, the 8 axes controlled machining system for free form surface was constructed and its performance was examined. The path generation procedure was proposed and its feasibility was proved applying to practical usage. -
Development of wear-mode transition model based on analysis of contact mechanics of rough surfaces
Grant number：14550120 2002 - 2003
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
KYOGOKU Keiji, MOMOZONO Satoshi, TANAKA Tomohisa
Grant amount：\3600000 （ Direct Cost: \3600000 ）
The Objective of this project is the experimental verification of Burwell-Strang's hypothesis, that is "abrupt increase of ware rate is caused by transition of yield area from asperity summit level to apparent contact area level".
To achieve the objective, we tried these approaches :
1.We developed a test apparatus for observation of deformation near an asperity using commercial metal microscope. In this test, we measured deformation of mesh previously made on side of softer surface after indentation and dragging between wedge of hard body and flat soft surface.
2.We got good agreement between numerical results of our model used by slip line field theory and those of finite element method. We refined our model using results of FEM. We also calculated distribution of real contact spots under normal and shear stress.
3.We also developed a contact microscope using total reflection method, in order to predict the transition pressure of contact between rough surface and smooth surface. In this apparatus, we can slide contact area in addition to normal load. For preliminary study, we observed growth and increase of real contact spots on blast finished random rough surface under normal load. The results indicated that apparatus could estimate transition pressure and verify our theory.
We are going to study the effect of normal and shear stress on change of real contact spot. We will also try to develop our theory that can predict wear transition pressure under extensive condition.
Teaching Experience
-
設計と生産の工学第二
Institution：東京工業大学
-
設計と生産の工学第一
Institution：東京工業大学
-
機械加工学
Institution：東京工業大学
-
加工学概論
Institution：東京工業大学
-
情報数理工学第二
Institution：東京工業大学
-
工業力学第二
Institution：東京工業大学
-
生産システム
Institution：名古屋大学
-
力学I
Institution：名古屋大学